Panasonic TH50PHW5UZ TH42PHW5UZ User Guide - Page 33

SET UP for Input Signals COLOR SYSTEM / Panasonic AUTO Select SIGNAL from the "SET UP" menu during VIDEO (S VIDEO) input signal mode. ("SIGNAL [VIDEO]" menu is displayed.) Press to select the "COLOR SYSTEM" or "Panasonic AUTO". Press to select each function. SET UP COMPONENT/RGB-IN SELECT RGB SIGNAL SCREENSAVER OSD LANGUAGE ENGLISH (US) Press (ACTION) button Mode Color system If the image becomes unstable: With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases become unstable. Should this occur, set the system to match the format of the input signal. SIGNAL 3D Y/C FILTER (NTSC) COLOR SYSTEM 3:2 PULLDOWN Panasonic AUTO (4:3) [ VIDEO ] ON AUTO OFF NORMAL Function Set the color system to match the input signal. If set to "AUTO", the color system is determined automatically. AUTO PAL SECAM M NTSC NTSC Panasonic AUTO (4:3) Set to "NORMAL" to view 4:3 images in an unchanged format when Panasonic AUTO is selected. If you would like to view 4:3 images in "Just" format, set to "JUST". 3:2 PULLDOWN When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are recorded at 24 frames per second. If the picture is not stable, turn the setting to off. SET UP Select "SIGNAL" from the "SET UP" menu during VIDEO (S VIDEO) or COMPONENT input signal mode. ("SIGNAL [VIDEO]" menu is displayed.) Press to select 3:2 PULLDOWN. COMPONENT/RGB-IN SELECT RGB SIGNAL SCREENSAVER OSD LANGUAGE ENGLISH (US) Press to set ON/OFF. Press (ACTION) button Note: When ON, this setting only affects the following signal input. • NTSC signal input during "VIDEO (S VIDEO)" input signal mode. • 525i(480i) signal input during "COMPONENT" input signal mode. R Press to exit from adjust mode. SIGNAL 3D Y/C FILTER (NTSC) COLOR SYSTEM 3:2 PULLDOWN Panasonic AUTO (4:3) [ VIDEO ] ON AUTO OFF NORMAL SIGNAL 3:2 PULLDOWN [ COMPONENT ] OFF 33