Panasonic WJ-PR204 2015 Panasonic Video Surveillance Catalog - Page 10

Encoders/decoders, Converters

Page 10 highlights

ENCODERS/DECODERS MODEL PRODUCT TYPE SUPPORTED VIDEO COMPRESSION VIDEO INPUTS/OUTPUTS AUDIO INPUTS/OUTPUTS SUPPORTED VIDEO RESOLUTION DISPLAY PATTERN MAX. FPS COAX PTZ CONTROL RS485 CAMERA INTERFACE NETWORK I/F SD MEMORY CARD SLOT SD CARD RECORDING FUNCTIONS POWER POWER CONSUMPTION RACK MOUNTABLE CONVERTERS WJ-GXE500 4 CH Video Encoder H.264 / MPEG-4 / M-JPEG 4 (Input) 1 (Input) D1 (720 x 480) VGA (640 x 480) QVGA (320 x 240) - 30fps/ch at H.264 in all resolutions 4 (for Panasonic camera) 1x RS485, 2/4 wire, half duplex (for 1-4 CH) 1x 10/100 Base-TX Yes (SDHC) 1fps (JPEG) Face Detection (CH 1 only) Dual Stream RTP over HTTP PoE, 12VDC 6W Optional (3 units for 1U) (WV-Q204/2S) WJ-GXE100 1 CH Video Encoder H.264 / M-JPEG 1 (Input) - D1 (720 x 480) VGA (640 x 480) QVGA (320 x 240) - 30fps/ch at H.264 in all resolutions - 1x RS485, 2/4 wire, half duplex 1x 10/100 Base-TX - - Dual Stream RTP over HTTP PoE, 12VDC 12VDC: 200mA PoE 48V: 75mA - WJ-GXD400 6 CH HD 1080i Video Decoder H.264 / MPEG-4 / M-JPEG HDMI x1 (Output) NTSC Composite (BNC) x1 (Output) HDMIx1 (Output) RCA x1 (Output) 1.3MP (1280 x 960) VGA (640 x 480) QVGA (320 x 240) Single (1x 1280 x 960) 3 split-screen (1x 1280 x 960, 2x VGA) 6 split-screen (6x VGA) 30fps/ch at H.264 in VGA - - 1x 100/1000 Base-T - - HD1080i HDMI Output 12VDC 12VDC, 1.4A Optional (2 units for 1U) (WV-Q204/1S, WV-Q204/2S) MODEL PRODUCT TYPE TRANSMISSION SPEED (UDP)10 TRANSMISSION SPEED (TCP)10 MAX. TRANSMISSION DISTANCE COAXIAL I/F NETWORK I/F FUNCTIONS OPERATING TEMPERATURE POWER POWER CONSUMPTION RACK MOUNTABLE BY-HPE11KTA (including 1x center adaptor and 1x camera adaptor) Coaxial-LAN Converter with PoE Function CENTER ADAPTOR CAMERA ADAPTOR 45Mbps or higher (when using an RG-59/U coaxial cable of less than 3,937 ft. [1.2km]) 35Mbps or higher (when using an RG-59/U coaxial cable of less than 3,937 ft. [1.2km]) Without PoE function: Max. 6,561 ft. [2km] (w/ RG-6/U) / Max. 3,937 ft. [1.2km] (w/ RG-59/U) With PoE Function: Max. 1,640 ft. [500m] (w/ RG-6/U) / Max. 656 ft. [200m] (w/ RG-59/U) 1x BNC 1x BNC 1x 10/100 Base-TX 1x 10/100 Base-TX, PoE11 PoE capability for IP cameras Plug & Play (No Setup Required) 32°F - 122°F (Center Adaptor) 14°F - 122°F (Camera Adaptor) 100-240VAC Power supplied through the coax cable from the center adaptor Max. 28W (including the power consumption of the camera adaptor) Max. 15.4W (PoE capability) Optional (4 center adaptors for 1U) (BY-HCA10A) -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13

ENCODERS/DECODERS
CONVERTERS
MODEL
WJ-GXE500
WJ-GXE100
WJ-GXD400
PRODUCT TYPE
4 CH Video Encoder
1 CH Video Encoder
6 CH HD 1080i Video Decoder
SUPPORTED VIDEO COMPRESSION
H.264 / MPEG-4 / M-JPEG
H.264 / M-JPEG
H.264 / MPEG-4 / M-JPEG
VIDEO INPUTS/OUTPUTS
4 (Input)
1 (Input)
HDMI x1 (Output)
NTSC Composite (BNC) x1 (Output)
AUDIO INPUTS/OUTPUTS
1 (Input)
HDMIx1 (Output)
RCA x1 (Output)
SUPPORTED VIDEO RESOLUTION
D1 (720 x 480)
VGA (640 x 480)
QVGA (320 x 240)
D1 (720 x 480)
VGA (640 x 480)
QVGA (320 x 240)
1.3MP (1280 x 960)
VGA (640 x 480)
QVGA (320 x 240)
DISPLAY PATTERN
Single (1x 1280 x 960)
3 split-screen (1x 1280 x 960, 2x VGA)
6 split-screen (6x VGA)
MAX. FPS
30fps/ch at H.264 in all resolutions
30fps/ch at H.264 in all resolutions
30fps/ch at H.264 in VGA
COAX PTZ CONTROL
4 (for Panasonic camera)
RS485 CAMERA INTERFACE
1x RS485, 2/4 wire, half duplex
(for 1-4 CH)
1x RS485, 2/4 wire, half duplex
NETWORK I/F
1x 10/100 Base-TX
1x 10/100 Base-TX
1x 100/1000 Base-T
SD MEMORY CARD SLOT
Yes (SDHC)
SD CARD RECORDING
1fps (JPEG)
FUNCTIONS
Face Detection (CH 1 only)
Dual Stream
RTP over HTTP
Dual Stream
RTP over HTTP
HD1080i HDMI Output
POWER
PoE, 12VDC
PoE, 12VDC
12VDC
POWER CONSUMPTION
6W
12VDC: 200mA
PoE 48V: 75mA
12VDC, 1.4A
RACK MOUNTABLE
Optional (3 units for 1U)
(WV-Q204/2S)
Optional (2 units for 1U)
(WV-Q204/1S, WV-Q204/2S)
MODEL
BY-HPE11KTA
(including 1x center adaptor and 1x camera adaptor)
PRODUCT TYPE
Coaxial-LAN Converter with PoE Function
CENTER ADAPTOR
CAMERA ADAPTOR
TRANSMISSION SPEED (UDP)
10
45Mbps or higher
(when using an RG-59/U coaxial cable of less than 3,937 ft. [1.2km])
TRANSMISSION SPEED (TCP)
10
35Mbps or higher
(when using an RG-59/U coaxial cable of less than 3,937 ft. [1.2km])
MAX. TRANSMISSION DISTANCE
Without PoE function:
Max. 6,561 ft. [2km] (w/ RG-6/U) / Max. 3,937 ft. [1.2km] (w/ RG-59/U)
With PoE Function:
Max. 1,640 ft. [500m] (w/ RG-6/U) / Max. 656 ft. [200m] (w/ RG-59/U)
COAXIAL I/F
1x BNC
1x BNC
NETWORK I/F
1x 10/100 Base-TX
1x 10/100 Base-TX, PoE
11
FUNCTIONS
PoE capability for IP cameras
Plug & Play (No Setup Required)
OPERATING TEMPERATURE
32
°
F - 122
°
F (Center Adaptor)
14
°
F - 122
°
F (Camera Adaptor)
POWER
100-240VAC
Power supplied through the coax cable from the center adaptor
POWER CONSUMPTION
Max. 28W (including the power consumption of the camera adaptor)
Max. 15.4W (PoE capability)
RACK MOUNTABLE
Optional (4 center adaptors for 1U)
(BY-HCA10A)