Panasonic WVCS574 WVCS574 User Guide - Page 32
Auto Mode Selection (AUTO MODE), To set ENDLESS to ON/OFF
View all Panasonic WVCS574 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
■ Auto Mode Selection (AUTO MODE) 1. To set auto mode Move the cursor to AUTO MODE and select a mode with the joystick. Modes change as follows: ** SET UP MENU ** PRESET 1 MAP HOME POSITION OFF SELF RETURN OFF AUTO MODE AUTO PAN AUTO PAN KEY AUTO PAN DIGITAL FLIP ON SPECIAL1 CAMERA RS485 SET UP PASSWORD LOCK OFF 2. When AUTO PAN is selected, set details as follows: OFF SEQ SORT AUTO PAN PATROL This determines the starting point and the cursor moves to END. ** AUTO PAN ** POSITION SPEED ENDLESS DWELL TIME PAN LIMIT ZOOM LIMIT START END L H OFF 1S OFF OFF RET (3) Move the joystick to select a panning endpoint and press the CAM (SET) button. This determines the endpoint and the cursor moves to POSITION. 4. To set a panning speed Move the cursor to SPEED, and set a panning speed with the joystick. Move the cursor to AUTO PAN O and press the CAM (SET) button to display the AUTO PAN setting menu. 3. To set a panning starting point and panning endpoint Follow the steps below. (1) Move the cursor to POSITION and press the CAM (SET) button. The cursor moves to START. ** AUTO PAN ** POSITION SPEED ENDLESS DWELL TIME PAN LIMIT ZOOM LIMIT START END L H OFF 1S OFF OFF RET ** AUTO PAN ** POSITION SPEED ENDLESS DWELL TIME PAN LIMIT ZOOM LIMIT START END L H OFF 1S OFF OFF RET (2) Move the joystick to select a panning starting point and press the CAM (SET) button. ** AUTO PAN ** POSITION SPEED ENDLESS DWELL TIME PAN LIMIT ZOOM LIMIT START END L H OFF 1S OFF OFF RET The panning speed increases when the joystick is moved to the right, and decreases when it is moved to the left. Caution: If the panning range is changed after the camera has not panned for a long time or has been panning in the same panning range, the picture may not be clear or noise may appear. In such cases, pan the camera fully several times. If this does not eliminate the problem, refer servicing to qualified service personnel. 5. To set ENDLESS to ON/OFF Move the cursor to ENDLESS, and select ON or OFF with the joystick. ** AUTO PAN ** POSITION SPEED ENDLESS DWELL TIME PAN LIMIT ZOOM LIMIT START END L H ON 1S OFF OFF RET ON: The camera pans from the starting point to the endpoint, and keeps rotating in the same direction to return to the starting point. Set PAN LIMIT to OFF before ENDLESS is set to ON. -32-