Pentax 18446 Optio 60 Operating Manual - Page 50
Connecting to a PictBridge-Compatible Printer
UPC - 027075111943
View all Pentax 18446 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Connecting to a PictBridge-Compatible Printer Even if you do not have a computer, you can connect the camera directly to a printer that supports PictBridge to perform image selection and printing using the camera monitor screen and controls. DPOF support also lets you specify which images you want to print and how many copies of each should be printed. Connecting the camera to the printer 1. Rotate the mode dial to and turn your camera on by pressing the button. 2. Press to select the [Set-up2] menu, then use to select USB Con. PC [USB Con.]. Press the button. PictBridge 3. Use or to select [PictBridge], then press the button. PC Camera 4. Connect your camera and the printer via a supplied USB cable. The screen turns off automatically and the setting screen will appear on the monitor after 2 seconds. OK : 2 / 3 On Windows 98/98SE/ME/2000, if the camera is connected to your computer and you unintentionally set the camera's USB connection to PictBridge, the "Install Driver" message will appear. Ignore this message and click "Cancel". Printing images When the camera is properly connected to a PictBridge-compatible printer, the [Select Printing Mode] screen is displayed on the monitor. Use or to select the print mode. In [Print] Mode: Lets you print the specified image with PictBridge. Step Figure Procedure Select Printing Mode Use or to select the [Print] mode, then press the button. 1 Print Print w/DPOF setting Select : OK : EN-50