Pentax ZX-10 ZX-10 Manual
Pentax ZX-10 Manual
 |
View all Pentax ZX-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Pentax ZX-10 manual content summary:
- Pentax ZX-10 | ZX-10 Manual - Page 1
• \ • • . . s. ' • PENTAX ZX-10 OPERATING MANUAL PENTALIC VW• ' zX- '417, ,;STACM:W0Fen.F1:47.cnI, 7!tn7yre,re.V1-:n ;r- ; - Pentax ZX-10 | ZX-10 Manual - Page 2
point) autofocus system • Smart picture mode • Automatic on/off flash function with the built-in flash popped up The camera explaining in this operating manual features the panorama function and data function. Read this instruction manual carefully to get a full explanation of operations before use - Pentax ZX-10 | ZX-10 Manual - Page 3
water, dirt or dust at points of electrical contact. Also check for battery leakage, traces of dirt or grease, or corrosion due to salinity or gas. If you cannot correct the problems, have your camera inspected at a Pentax service center. Repairs of this nature are not covered under the terms of the - Pentax ZX-10 | ZX-10 Manual - Page 4
the "Precautions for Your Camera" section or any other operation contrary to the instructions outlined in this manual, charges will be assessed and a repair quotation will be provided. PRECAUTIONS FOR BATTERY • Use two 3V lithium batteries (CR2 type). • Misuse of the battery can cause hazards such - Pentax ZX-10 | ZX-10 Manual - Page 5
• Compatibility of F and FA lenses with the built-in flash 70 Setting the film speed (ISO) manually 71 Installing the battery in the Data Back 72 Adjusting the data on the Data Back 73 Using a Pentax Dedicated External Flash 75 • Contrast-Control-Sync Flash Photography 77 Daylight-sync - Pentax ZX-10 | ZX-10 Manual - Page 6
Flash information (p.37,39) : Red-eye reduction flash indication (p.40) '4A : Automatic flash function information (p.42) ISO : Manual-set film speed (p.71) 88S : Tv Shutter speed : Battery metering. With multi(6)-segment metering, the camera records the brightness in six zones within the - Pentax ZX-10 | ZX-10 Manual - Page 7
beginners) 1. Loading the batteries 2. Attaching the lens Open the battery chamber cover by using a coin. Load two batteries (CR2 type) according to the markings ( + , -) on the battery chamber cover. (See page 14.) Align the red indexes on the lens and camera. Turn the lens to the right until - Pentax ZX-10 | ZX-10 Manual - Page 8
Body Compatibiiity Chart Mount Type Lens Type Camera Model (A) KAFI-nnount (B) Km-mount (C) K. mount (D) K-mount (E) Screw mount Pentax-FA lens Pentax-F lens Pentax-A lens Pentax-M lens and Pentax lens SMC TAKUMAR lens MZ-10/ZX-10,MZ-5/ZX-5,Z-1,./PZ-1,,Z-1/PZ-1, Z-10/PZ-10,Z-20/PZ-20,Z-70/PZ - Pentax ZX-10 | ZX-10 Manual - Page 9
SHOW TO USE THIS OPERATING MANUAL This manual is organized into the following sections, allowing you to optimize the use of the camera: Q I . BASIC OPERATION (PREPARATION) Page 13 - 26 IL ADVANCED OPERATIONS Page 43 - 87 U. BASIC OPERATION (SHOOTING) Page 27 - 42 N. OTHER INFORMATION Page 88 - - Pentax ZX-10 | ZX-10 Manual - Page 10
switching, red-eye reduction flash function, exposure compensation and automatic flash function of the built-in flash. • The optional "AA-Battery Pack F." is also available for this camera instead of using the lithium batteries. O m -4 Oo z O m 3. Turn the battery chamber cover screw in the - Pentax ZX-10 | ZX-10 Manual - Page 11
given as an example and may be different if a lens is attached. Battery Life using 24-exposure film rolls, General existing light photography about 120 rolls Flash photography (using flash 50% of the times) about 20 rolls Flash photography (using flash 100% of the times) about 12 rolls Bulb - Pentax ZX-10 | ZX-10 Manual - Page 12
direction of the arrow. • We assume no responsibility nor liability for damages resulting from the use of lenses made by other manufacturers. • The camera body and lens mount incorporate lens information contacts and an AF coupler. Dirt, dust, or corrosion may cause damage to the electrical system - Pentax ZX-10 | ZX-10 Manual - Page 13
shutter. When taking a picture, depress the shutter release button gently to prevent camera shake. • Before loading a roll of film, slowly depress the shutter format selected. • The data back operates on a 3V lithium battery. If the data imprinted on the picture or the data displayed on the - Pentax ZX-10 | ZX-10 Manual - Page 14
is used, the correct film speed is automatically set for the camera. If you use a non-DX coded film, you can set the film speed manually. See page 71. • Before loading film for the first time after purchase, open the back cover and remove the protective card. DO NOT TOUCH THE SHUTTER CURTAINS. 111 - Pentax ZX-10 | ZX-10 Manual - Page 15
are displayed on the LCD panel. • The film counter indication advances one each time the shutter is released. (8) UNLOADING FILM is 1100 XVLN1d 2 N*. a l. A film roll is completely rewound. • When removing the film from the camera, protect it from exposure to direct sun light. 2. When the film - Pentax ZX-10 | ZX-10 Manual - Page 16
film when the film reaches the number of frames indicated on the film cartridge. * Rewinding a film in mia-roil If you wish to unload the film the shutter release button. In this mode, the camera automatically lens aperture ring to the [ A ] posi- tion as shown in the illustration. • To move the lens - Pentax ZX-10 | ZX-10 Manual - Page 17
. The Green Operation Mode oper- ates only with an A-lens attached. • See page 60 to 65 for any other exposure mode. 2. Set the mode dial to the [(Pm)] position. (2) SETTING THE SINGLE-FRAME DRIVE MODE • One picture is taken each time the shutter release button is depressed. • See page 43 for - Pentax ZX-10 | ZX-10 Manual - Page 18
LENSES Using the zoom function makes the subject appear larger (telephoto) or smaller (wide angle) in the viewfinder. Turn the zoom ring to the desired position and depress the shutter 2 jn, PENTAX 0 nO XV manual zoom function with an FA zoom lens attached Pull the power zoom ring toward the camera - Pentax ZX-10 | ZX-10 Manual - Page 19
, a tripod that is z C) heavier than the total weight of the camera and lens is recommended to avoid camera shake. • Although there are individual differences among pho- tographers, in general the shutter speed for a hand held camera is the inverse of the focal length. For ex- ample, 1/50 of - Pentax ZX-10 | ZX-10 Manual - Page 20
the shutter release button halfway down, the lens automatically focuses. • See page 46 for manual focusing. shutter release button is depressed halfway down, the shutter speed and aperture setting are displayed in the viewfinder and the LCD panel. • When the Smart Picture Mode is set, the camera - Pentax ZX-10 | ZX-10 Manual - Page 21
shutter release button. • When using the SMC Pentax-F Soft 85mm f/2.8 lens, set the aperture between f/2.8 and f/4.5. See page 49 for more details. Predictive Autofocus Mode When the camera situation. In the Shutter-Priority AE Mode and Metered Manual Mode, the flash-recommended indicator blinks - Pentax ZX-10 | ZX-10 Manual - Page 22
release button fully, and the flash unit discharges. After using the flash, retract the built-in flash by pressing it down into the camera body. • The shutter cannot be released until the flash is fully charged. • If the built in flash is used continuously, the battery may become warm, but it - Pentax ZX-10 | ZX-10 Manual - Page 23
. It can be reduced by taking the photo in a brighter light condition or by shooting with a wider angle lens at a closer distance, or by employing the red-eye reduction flash feature. When using a Pentax dedicated flash unit off the camera, it may also help to position the flash as far away from the - Pentax ZX-10 | ZX-10 Manual - Page 24
flash in its popped up position, depress the multi-function button until [5A] disappears on the LCD panel. (1) SELECTING A DRIVE MODEM. This camera the shutter re- lease button is depressed. Consecutive-Frame Mode [Qi] : Pictures can be taken consecutively while hold- ing down the shutter release - Pentax ZX-10 | ZX-10 Manual - Page 25
to set Set the drive mode switch to [W. • The camera focuses on the subject frame by frame in this mode. • The shutter cannot be released while the built-in flash is being charged. 2. Self-Timer Mode The self-timer mode delays the shutter release, and is useful for taking group shots that include - Pentax ZX-10 | ZX-10 Manual - Page 26
up in the viewfinder. Depress the shutter release button fully to take the photograph. • If an old type screw-mount lens is used with an optional Mount on the subject in the manual focus mode with the aid of the matte field in the viewfinder as you would with a non-AF SLR camera. a) The in-focus - Pentax ZX-10 | ZX-10 Manual - Page 27
or an Auto Bellows for a close-up photography. o Note on the SMC Pentax F SOFT 85mm f, 2.8 lens rzrnn When shooting at a distance closer than approx. 1.5m (4.9ft), set the lens to a manual f-stop setting between 0 f/2.8 and f/4.5. A smaller aperture (f/5.6 to f/32) may cause the autofocus - Pentax ZX-10 | ZX-10 Manual - Page 28
the processing lab for more details. rrz0nn 0 • Panorama format processing facilities differ depending on the area and requirement. Your local film processor or 3) camera dealers will advise you on all options available to you. • When the panorama format pictures are printed with a standard size - Pentax ZX-10 | ZX-10 Manual - Page 29
select a darker subject. Use a flash if the subject is too dark. • IMI OFF ON 'Ma 11. 4 6o A•5.6 41_1 For easy picture taking, use the Green Operation Mode. You simply depress the shutter release button. The camera selects the best combination of aperture and shutter speed setting. How to set - Pentax ZX-10 | ZX-10 Manual - Page 30
, the telephoto lens produces a portrait in crisp focus against the out-of-focus background, while the wide angle lens enables you to [ ]. ' • When the shutter release button is depressed halfway down, [In] is displayed in the viewfinder. The shutter speed and aperture setting are also displayed - Pentax ZX-10 | ZX-10 Manual - Page 31
in the viewfinder and on the LCD panel. SNOLI.Vtl3dO 030NVACV Action Program Mode 1M I • a a la oi 8 Tv5o ktif.0 Q--1 This mode selects a faster shutter speed to capture a moving subject. Go How to set Set the mode dial to [ PICT ]. Move the select switch until [ 0 superim- poses on [Irk - Pentax ZX-10 | ZX-10 Manual - Page 32
, an appropriate shutter speed is automatically set by the camera for a proper shutter release button is depressed halfway. When lenses other than an F or FA series are used, no approximate aperture indication will appear in the viewfinder. • When the Pentax-A 50mm f/1.2 lens is in use with the lens - Pentax ZX-10 | ZX-10 Manual - Page 33
SNOLLVkl3dO O3ONVAGV co 5 2 PENTAX 35 - 80 35 0000 0 C 216118 164 0 MALNad Using the Shutter-Priority AE Mode Purpose When the desired shutter speed is selected, the appropriate aperture is automatically set by the camera for a proper exposure according to the brightness of the subject. This mode - Pentax ZX-10 | ZX-10 Manual - Page 34
shutter release button is depressed halfway down, the shutter speed, approximate aperture and bar graph will be displayed in the viewfinder. When lenses other than an F or FA lens dicator will blink. • When using a Pentax- A 50mm f/1.2 lens with the lens aperture ring set other than the A - Pentax ZX-10 | ZX-10 Manual - Page 35
for shooting night scenes and fireworks. The shutter remains open as long as the shutter release button is held down. How to set 1. Set the lens aperture ring to the desired fstop other than [ A ]. 2. Set the mode dial to [ Tv ]. 3. Adjust the shutter speed to slower side by moving the select - Pentax ZX-10 | ZX-10 Manual - Page 36
which may fool the camera's built-in exposure meter Exposure compensation does not work in the Smart Picture Mode, Metered Manual Mode and Bulb Exposure Mode. • The exposure compensation range is flash is retracted. If the PCV Signal Mode is switched with the built-in flash popped up, the flash - Pentax ZX-10 | ZX-10 Manual - Page 37
. to a slower shutter speed which does not cause camera shake. The slowest shutter speed depends on the focal length of the lens in use. The shutter speed of 1/100 sec. is automatically set when a Pentax non-autofocus lens is in use. Metered Manual Mode • When using the built-in flash in the Metered - Pentax ZX-10 | ZX-10 Manual - Page 38
at 35mm, it will occur when the camera-to-subject distance is closer than 1.5m. *4 : Vignetting will occur at focal lengths between 80-90mm. (9) SETTING THE FILM SPEED (ISO) MANUALLY 0111111 2 3 rlf r s • IRnll OF ON 0 0469 This camera automatically reads the film speed from the film's DX - Pentax ZX-10 | ZX-10 Manual - Page 39
The battery will last for approx. 3 years. 1. Ensure that a film is not loaded, then open the back cover. 2. Loosen the battery cover 9 ADJUST button Note: Carefully press the button with the protrusion part of the camera's strap clamp. a Do not press the buttons with an object having have - Pentax ZX-10 | ZX-10 Manual - Page 40
blur. • If film with ISO rating of 50 or slower is used, the printed characters may be dark or dim. • If you release the shutter while the blinking data is being ;orrected, the data cannot be imprinted. SNOLLVU3d0 033NVACIV (12) USING A PENTAX DEDICATED EXTERNAL FLASH If the built-in flash is not - Pentax ZX-10 | ZX-10 Manual - Page 41
camera shake. The slowest shutter speed varies according to the lens focal length. When a non-autofocus lens is in use, the shutter speed will be set to 1/100 of second. AF200T AF2807 AF400T Red f/2.8 f/4 f/4 Green f/5.6 f/8 f/8 Yellow f/11 with ISO 100 Notes on Pentax dedicated flash - Pentax ZX-10 | ZX-10 Manual - Page 42
the flash is charged, the camera automatically switches to the flash-sync speed. Automatic aperture setting in the Smart Picture Mode, Picture Mode or Shutter-Priority AE Mode Flash confirmation in the viewfinder TTL auto flash Slow-speed sync in the Shutter-Priority AE Mode or Metered Manual Mode - Pentax ZX-10 | ZX-10 Manual - Page 43
-in flash. 4. Release the shutter. • In the slow-speed-sync shooting, use of a tripod is recommended to prevent camera shake. (15) ACCESSORIES (OPTION) MUM A number of dedicated accessories are available for this camera. • Cable Switch F A shutter release cord designed for use with the MZ10/ZX-10 - Pentax ZX-10 | ZX-10 Manual - Page 44
with the double cable release. When taking a vertical photograph, position the camera with the grip facing upward. • When attaching the "ADAPTER K FOR 645 LENS" to the camera body, the camera shift lock screw of the lens may hit the camera body. To avoid this, change the position of the fixing screw - Pentax ZX-10 | ZX-10 Manual - Page 45
A higher shutter speed also helps prevent camera shake. Slow shutter speed • 4' 44,1 Closed-down aperture 85 Effect of Aperture The aperture increases or reduces the amount of re- flected light from an object which passes through the lens, controlling how much light strikes the film. If the - Pentax ZX-10 | ZX-10 Manual - Page 46
35-80mm I/4-5.8 lens focused at the distance of 2m with the lens focal length 35mm. 15 10 9 8 6 5 4 31 2 1 0 F4 F55 F8 Camera-tosubject F15 F11 infrared pictures, refer to the instructions accompanying the film. The Auto Exposure Mode does not give a correct exposure. Use - Pentax ZX-10 | ZX-10 Manual - Page 47
88 IV OTHERS TROUBLESHOOTING What appears troublesome may be easily remedied. Here are some problems that may occur and their remedies. Before contacting a Pentax service center, check the following items. Symptoms Causes Remedies The shutter does riot release. The main switch is [OFF] Turn ON - Pentax ZX-10 | ZX-10 Manual - Page 48
,Speed range:(1)Auto 1/2000-30 sec.(stepless),(2)Manual 1/2000-30 sec.(3)Bulb, Shutter lock by setting Main switch in OFF position. Lens Mount Pentax KAF2 bayonet mount (K-mount with AF coupler, lens information contacts and power contacts) Compatible Lens Pentax lenses. and K-mount lenses - Pentax ZX-10 | ZX-10 Manual - Page 49
3 II 7.00nun 56 -2 26 -3 21 -4 Itam TN IS. Is 05 Is 2 1 I;S 30 07 15 2513 SOO 1000 503 At ISO 100 with F35 - 80mm f/4 - 5.6 lens Action Program Mode 6 7 I 9 10 II II 13 14 15 16 17 II III 20 21 EV F No. - 32 22 2 f 2-262,,m 11 - - 16 - 2.6 -2 11112 30r 15s II 4. 21 - Pentax ZX-10 | ZX-10 Manual - Page 50
only after you accept the quoted service charge, instruct the service station to proceed with the servicing. The local warranty policies available from Pentax distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the warranty card supplied with - Pentax ZX-10 | ZX-10 Manual - Page 51
NAMES OF WORKING PARTS II O Shutter curtain O Viewfinder eyepiece O Eyecup FH (p.45) O Panorama lever (p.50) O Exposure compensation button (p.66) O Film information window 0 Pressure plate O Back cover O Film leader end mark (p.23) 0 Battery chamber cover screw (p.14) 0 Battery chamber cover (p.14 - Pentax ZX-10 | ZX-10 Manual - Page 52
. Julius-Vosseler-Strasse, 104, D-22527 Hamburg, GERMANY Pentax U.K. Limited. Pentax House, Heron Drive, Langley, Slough SL3 8PN, U.K. Pentax France S.A. Z.I. Argenteuil, 12114, rue Jean Poulmarch, 95106 Argenteuil, FRANCE Pentax Benelux B.V. (for Netherlands) Spinveld 25, 4815 HR Breda, NETHERLANDS
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
 |
 |
•
\
•
•
.
.
'
•
s .
PENTAX
ZX-10
OPERATING
MANUAL
PENTALIC
VW'
•
zX-
'
41,
7
,
;STACM:W0Fen.F1:47.cnI
,
7!tn7yre
r
,e.V1
-
:n
;r
-
;