Pentax ZX-10 ZX-10 Manual - Page 24
Advanced, Operations
View all Pentax ZX-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
2 (5) w CCaa 0 m 0 z 0 C) AUTOMATIC FLASH FUNCTION 0 This is a convenient built-in flash mode that the flash 0 discharges only when it is necessary even if the flash is z in the popped-up position. How to set 1. Push the flash pop-up button to activate the flash. 2. Depress the multi-function button until ['s A appears on the LCD panel. OFF ON r a it VI Tv3o G__ • In the Smart Picture Mode and Picture Mode, the flash will only discharge when the subject is in a low light or backlit condition. • Depress the multi-function button with the built-in flash in its popped up position. If the button is depressed with the built-in flash in its retracted position, the PCV audible beep mode will be switched on. How to cancel With the built-in flash in its popped up position, depress the multi-function button until [5A] disappears on the LCD panel. (1) SELECTING A DRIVE MODEM. This camera has a total of three drive modes as shown. Types of Drive Modes Single-Frame Mode [D] : One picture is taken each time the shutter re- lease button is depressed. Consecutive-Frame Mode [Qi] : Pictures can be taken consecutively while hold- ing down the shutter release button. See page 44 III. ADVANCED OPERATIONS Self-timer Mode [0] : A picture will be taken with a 12-second-delay. See page 44. SNOIlVli3dO 030NVACIV