Pentax ZX-5 ZX-5 Manual - Page 79

(10) SETTING THE FILM SPEED (ISO) MANUALLY GUM 2 3 4 0 ISO '4. to A, as Soo • 2, ISO 0 OSI 4r•N SNOLLVI:13dO 030NVAGV This camera automatically reads the film speed from the film's DX code. However, the film speed setting can be changed. If you use a non-DX coding film, set the film speed manually. How to set 1. While holding down the exposure compensation dial lock button, set the exposure compensation dial to [ ISO ] . 2. To change the ISO to a larger number (higher film speed), hold down the AF Spot button until the desired ISO is indicated on the LCD panel. 3. To change the film speed to a smaller number (lower film speed), hold down the Spot AF button while holding down the exposure compensation lock button. 4. After the ISO is set, move the exposure compensation dial to [ 0 ]. • When exposure compensation dial is set to [ ISO ], [ A ] is displayed on the LCD panel to indicate that the ISO can be changed to a large number. When the exposure compensation dial lock button is depressed, [ V ] appears on the LCD panel to indicates that the ISO can be changed to a smaller number. • The shutter cannot be released with the exposure compensation dial set at [ISO].