Pfaff 92 Owner's Manual - Page 46
Cording
View all Pfaff 92 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Cording Machine Setting: A 0; B To cord on your Pfaff 92, use a cording foot and a twin needle. Twin needles are available for needle distances of 1.2 (3/64"), 1.6 (1/16"), 1.8, 2.0 (5/64"), 2.5 (3132), 3.0, and 4.0 (5/32") millimeters. Cording feet are available in three varieties, as follows: Pin tucks are made with cording foot No. 847680 (7 grooves, 3/64" wide each) and a 1.2-mm twin needle. For narrow cording use cording foot No. 847675 (5 grooves, 1/16" wide each; see ill.) and a 1.6-mm twin needle. Wider cording is made with cording foot No. 847 671 (3 grooves, 5/64" wide each) and a twin needle with a needle distance of 2.0 or 2.5 millimeters. Cording feet and twin needles, System 130, ore supplied on special request and at extra cost. Changing the Needle and the Sewing Foot Bring take-up lever to highest point, loosen needle set screw a, and pull ordinary needle out of needle clamp. Insert twin needle into opening of needle clamp and push it up as far as it will go Make sure that the flat side of the shank faces toward the back. Tighten needle set screw a securely. 45 DR 020