Pfaff 93 Owner's Manual - Page 27

ii 3. Needle Breaks Cause: Bent needle strikes point of sewing hook. Needle too thin or thread too heavy. Fabric pulls needle so it bends and strikes needle plate. Bobbin case inserted incorrectly; Remedy: Replace needle at once to prevent further damage. Use correct needle and thread sizes. Don't force the feeding motion. Guide the material lightly. Push bobbin case until you hear it snap into place. 4. Faulty Stitch Formation Ca use: Improper tension. Thread too heavy, knotty or hard. Bobbin unevenly wound. Pieces of thread between tension discs. Remedy: Adjust tensions as instructed. Use only first-rate thread - the correct size for the needle and fabric. Don't run thread over finger when winding the bobbin. (For instructions see page 11). Raise presser bar lifter and remove thread. 5. Machine Feeds Improperly Cause: Machine does not feed because stitch length control set on "0". Accumulations of lint packed between feed teeth. Remedy: Regulate stitch length, as desired. Take off needle plate and remove lint with a stiff brush. 28