Pfaff Freestyle 1522 Owner's Manual - Page 5

Notes, safety

Page 5 highlights

Notes on safety Notes on safety for household sewing machines in accordance with EN 60 335-2-28 and IEC 60 335-2-28 1 The user must exercise adequate caution with regard to the up and down movement of the needle and must constantly observe the sewing area while sewing. 2. When leaving the machine unattended, during maintenance work or when replacing mechanical parts or accessories, always disconnect the machine from the mains by pulling out the mains plug. 3. The maximum permissible wattage for the sewing lamp is 15 watts. 4. The tension of the drive belt must only be adjusted by a PFAFF mechanic. 5. The machine must be operated in accordance with the indications on the specification plate. 6. Do not insert any objects into openings on the machine. 7. Do not use the sewing machine it: • there is visible damage • its function is disturbed • it is wet, eg with condensation which can occur when a cold machine is brought into a warm room. 8. Do not pull the mains plug out of the socket by its cord. 9. If this appliance is used for another purpose than that for which it is intended or if it is wrongly operated, we cannot accept any liability for any damage caused. 10. To avoid the risk of electric shock, do not open the machine. There are no parts inside the machine which the user can repair. Repairs are solely the responsibility of our qualified service staff. 11. Be sure to use only original PFAFF parts. 12. The machine is designed for a mains supply with a nominal voltage of +1- 10% and a rated frequency of +7- 4%. 13. When used properly the temperature of the outer components of a non-electronically controlled foot control can reach up to 85C. Constant use at a low speed is therefore not permitted in order to avoid damage. Environment The recommended environment is: Ambient temperature 1 0C to 40C Humidity 20°c to 80°c Storage temperature: -25C to +60CC The machine is suppressed and immune to interference; however, it should not be operated near electronic devices such as radios, TV5, PCs, broadcasting transmitters, etc. This sewing machine is a high-quality electronic-mechanical device. It is a machine for supervised use in the home. It should not be subjected to: dust, dampness, direct sunlight, static electricity, heat-radiating objects, corrosive chemicals or liquids. For ventilation purposes the machine must only be operated on an open surface which is both firm and horizontal. Care of the machine Always protect the machine from damage which may be caused by it being hit or dropped. Cleaning Housing and display: To clean the housing, use only a clean, dry, soft, lint-free cloth. To remove any stubborn dirt use a soft cloth with alcohol. Please note! Do not use any insecticides or chemical products such as petrol or liquid chemicals to clean the housing.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

Notes
on
safety
Notes
on
safety
for
household
sewing
machines
in
accordance
with
EN
60
335-2-28
and
IEC
60
335-2-28
1
The
user
must
exercise
adequate
caution
with
regard
to
the
up
and
down
movement
of
the
needle
and
must
constantly
observe
the
sewing
area
while
sewing.
2.
When
leaving
the
machine
unattended,
during
maintenance
work
or
when
replacing
mechanical
parts
or
accessories,
always
disconnect
the
machine
from
the
mains
by
pulling
out
the
mains
plug.
3.
The
maximum
permissible
wattage
for
the
sewing
lamp
is 15
watts.
4.
The
tension
of
the
drive
belt
must
only
be
adjusted
by
a
PFAFF
mechanic.
5.
The
machine
must
be
operated
in
accordance
with
the
indications
on
the
specification
plate.
6.
Do
not
insert
any
objects
into
openings
on
the
machine.
7.
Do
not
use
the
sewing
machine
it:
there
is
visible
damage
its
function
is
disturbed
it
is
wet, eg
with
condensation
which
can
occur
when
a
cold
machine
is
brought
into
a
warm
room.
8.
Do
not
pull
the
mains
plug
out
of
the
socket
by
its
cord.
9.
If
this
appliance
is
used
for
another
purpose
than
that
for
which
it
is
intended
or
if
it
is
wrongly
operated,
we
cannot
accept
any
liability
for
any
damage
caused.
10.
To
avoid
the
risk
of
electric
shock,
do
not
open the machine.
There
are
no
parts
inside
the
machine
which
the
user
can
repair.
Repairs
are
solely
the
responsibility
of
our
qualified
service
staff.
11.
Be
sure
to
use
only
original PFAFF
parts.
12.
The
machine
is
designed
for
a
mains
supply
with
a
nominal
voltage
of
+1-
10%
and
a
rated
frequency
of
+7-
4%.
13.
When
used
properly the
temperature
of
the
outer
components
of
a
non-electronically
controlled
foot
control
can
reach
up
to
85C.
Constant
use
at
a
low
speed
is
therefore
not
permitted
in
order
to
avoid
damage.
Environment
The
recommended
environment
is:
Ambient
temperature
1
0C
to
40C
Humidity
20°c
to
80°c
Storage
temperature:
-25C
to
+60CC
The
machine
is
suppressed
and
immune
to
interference;
however,
it
should
not
be
operated
near
electronic
devices
such
as
radios,
TV5,
PCs,
broadcasting
transmitters,
etc.
This
sewing
machine
is
a
high-quality
electronic-mechanical
device.
It
is
a
machine
for
supervised
use
in
the
home.
It
should
not
be
subjected
to:
dust,
dampness,
direct
sunlight,
static
electricity,
heat-radiating
objects,
corrosive
chemicals
or
liquids.
For
ventilation
purposes
the machine
must
only
be
operated
on
an
open
surface
which
is
both
firm
and
horizontal.
Care
of
the
machine
Always
protect
the machine
from
damage
which may
be
caused
by
it
being
hit
or
dropped.
Cleaning
Housing
and
display:
To
clean
the
housing,
use
only
a
clean,
dry,
soft,
lint-free
cloth.
To
remove
any
stubborn
dirt
use
a
soft
cloth
with
alcohol.
Please
note!
Do
not
use
any
insecticides
or
chemical
products
such
as
petrol
or
liquid
chemicals
to
clean
the
housing.