Pfaff GrandQuilter 18.8 Owner's Manual - Page 6
Belt guard
 |
View all Pfaff GrandQuilter 18.8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Belt guard Your machine comes with a belt guard to prevent damage to your motor sensor and protect you from getting caught in the belt. In the box you will find the plastic cover and attached to the machine are the screws used to hold the belt guard in place. Step 1. Locate the screws on the machine there are two above the hand wheel and one can be found below the hand wheel. Step 2. Remove the three screws. Step 3. Locate the belt guard and position over the hand wheel and the motor. Step 4. Replace the three screws so that they hold the belt guard in place. This photo shows the belt guard in place and how it protects the motor sensor and the belt. 6
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
 |
 |
6
Belt guard
Your machine comes with a belt guard to prevent damage to your motor sensor and protect you from getting
caught in the belt.
In the box you will find the plastic cover and attached to the machine are the screws used to
hold the belt guard in place.
Step 1.
Locate the screws on the machine there are two
above the hand wheel and one can be found below the
hand wheel.
Step 2.
Remove the three screws.
Step 3.
Locate the belt guard and position over the hand
wheel and the motor.
Step 4.
Replace the three screws so that they hold the belt guard in place.
This photo shows the belt guard in place and how it
protects the motor sensor and the belt.