Pfaff coverlock 4.0 Owner's Manual - Page 23

Touch screen overview Sewing mode is the Àrst view on the graphic display after you turn on the machine. Your selected stitch will be shown in real size in the stitch Àeld. Here you will Ànd all the basic information you need to start sewing. This is also the menu where you adjust the settings of your stitch. When turning on the machine, the last sewn stitch is selected. 1. Stitch selection drop down menu 2. Stitch Àeld 1 3. Needle position recommendation 4. Cutting width recommendation 2 5. Presser foot pressure recommendation 6. Thread tension adjustment 7. Differential feed adjustment 6 8. Stitch length adjustment 9. Speed setting 10.Icons for increasing and decreasing the value of the selected adjustment. Select a stitch • Touch the arrow to the right in the stitch selection drop down menu to open a list of the coverlock™ 4.0 stitches. • Use the scroll bar arrows to scroll in the list. Touch a stitch in the list to select it. 3 4 5 7 8 9 10 Recommendations Recommendations for needle position, cutting width and presser foot pressure are always visible in the Sewing mode view. When a stitch is selected, a pop-up with extended recommendations is displayed. Touch the OK icon (A) to close the pop-up. 11.Recommendation for Cutter cover A/Coverstitch table B 12.Stitch Ànger lever setting recommendation 13.Upper cutter position A/B recommendation 14.Recommendation for 2-thread converter 15.Recommendation for upper looper clutch lever setting A/B The extended recommendations for the selected stitch can also be found in the Info System view, see page 26. 11 12 14 A 13 15 Touch screen 23