Pfaff coverlock 4872 Owner's Manual - Page 44
Display - tension settings
View all Pfaff coverlock 4872 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Prog • 3F LCD Display 1 Program no. 2 Name of stitch 3 Stitch length in mm 4 Differential feed setting 5 Needle position 6 Swiveling stitch width latch position --- stitch width latch in basic position . 3 stitch width latch lowered 7 Upper overedge looper position Thi looper engaged looper lowered Converter engaged 8 Power table position with power table without power table 9 Upper blade position upper blade engaged 2_. upper blade disengaged 10 Seam width in mm 11 Setting of spring presser foot latch A or B - As long as E appears in the display, the transparent presser foot from the accessories can also be used. 40 10 11 1213 Key functions 1 Tension keys + and For increasing and reducing thread tension 10 Tension release key When this key is pressed and held, the thread tensions are released. This al lows the thread chain to be easily pulled from the machine. When the key is re leased, the thread tensions reset for the programm selected. 11 Program selection key + and - The desired program can be selected with these keys. There are 20 programs preset for your use. If the keys are kept pressed down, the programs will auto matically run on. When the machine is switched off and back on, the last pro gram sewn will appear. 12 Memory key M: The adjusted settings for stitch length, differential feed and thread tension can be stored using this key. 13 Memory selection key P: With this key, you can activate the program memory a ii d the programmable memories A, B and C.