Pfaff creative 1371 Owner's Manual - Page 102

Serg in g with zigzag stitch ro ZZ hzLi Stitch-width: as required Sewing thread: Embroidery darning thread or sewing thread The stored zigzag-stitch is suitable for serging of - ." light materials The more difficult the material, the wider the stitch width must be selected for the zig zag stitch. Ensure that the needle passes outside the outer edge during sewing. In this way the mate rial edge is properly serged and well covered (Fig. 1). For heavy or easily fraying materials, use: Program: 15 or 09 (Fig. 3). I Serging with overlock foot For materials which contract during serging use the overlock foot. 11 I -- 3-5 3 - Stitch-width: as required Serge the raw edge with the required zigzag stitch. The material enters at the red marking on the sew ing foot (Fig. 2). • PreperaUon of the sewing foot (overlock foot No. 3) Turn screw "A" fully to the front. The red mark "B" is then on the right sewing foot side. Allow the edge of the material to be sewn to enter close against the red mark. During sewing, the thread places 2 itself over the wire "C". By this means you will re ceive a beautiful smooth seam (Fig. 2). For change of needle position for zigzag stitch see page 77. 3 87