Pfaff performance 5.0 Owner's Manual - Page 35

Start/stop, Thread snips, Reverse button, Reverse indicator, Action indicator

Page 35 highlights

Start/stop Immediate tie-off Presser foot up and extra lift toggle Stitch restart Speed control Presser foot down and pivot toggle Needle up/down Thread snips Reverse indicator Action indicator Reverse button Start/stop 3UHVVWKLVEXWWRQWRVWDUWRUVWRSWKHPDFKLQH ZLWKRXWXVLQJWKHIRRWFRQWURO3UHVVWKHEXWWRQ once to start and press it again to stop. Thread snips 3UHVVWRFXWERWKQHHGOHDQGEREELQWKUHDG immediately. ,ISUHVVLQJWKLVEXWWRQZKLOHVHZLQJWKHPDFKLQH will complete the stitch and cut the threads before WKHQHHGOHPRYHVWRWKHVWDUWSRVLWLRQRIWKHQH[W stitch. Your machine ties off the thread, cuts the needle and bobbin threads and raises the presser foot and the needle. 7KHWKUHDGVQLSVIXQFWLRQFDQEHSURJUDPPHGVHH SDJH Note: Threads are cut automatically when buttonholes are sewn with the Sensormatic buttonhole foot. The presser foot will not raise after thread snips if automatic presser foot lift has been deactivated in the settings menu. Thread snips performed by the machine can be cancelled in the settings menu. Reverse button )RUSHUPDQHQWUHYHUVHSUHVVWKHEXWWRQRQFHEHIRUH VWDUWLQJWRVHZ7KHUHYHUVHLQGLFDWRUZLOOEHOLW DQGWKHPDFKLQHVHZVLQUHYHUVHXQWLO\RXSUHVV WKHEXWWRQDJDLQWRFDQFHO,I\RXSUHVVWKHUHYHUVH EXWWRQZKLOHVHZLQJWKHPDFKLQHVHZVLQUHYHUVH IRUDVORQJDV\RXNHHSWKHEXWWRQSUHVVHG7KH UHYHUVHLQGLFDWRULVOLWZKHQWKHUHYHUVHEXWWRQLV pressed. 5HYHUVHLVDOVRXVHGZKHQVHZLQJPDQXDO EXWWRQKROHVGDUQLQJVWLWFKHVSURJUDPPHGWLHRII end and tapering stitches. Reverse indicator 7KHUHYHUVHLQGLFDWRUZLOOEHOLWZKHQSUHVVLQJWKH UHYHUVHEXWWRQWRVHZLQUHYHUVH,WLVDOVROLWZKLOH VHZLQJSHUPDQHQWUHYHUVH Action indicator 7KHDFWLRQLQGLFDWRULVOLWWRLQGLFDWHWKDWDQDFWLRQ LVWREHGRQHIRUH[DPSOHSHUIRUPLQJWDSHULQJ7KH indicator stays lit until the action is done. 3:7 Machine settings & buttons

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84

3:7
Machine settings & buttons
Start/stop
once to start and press it again to stop.
Thread snips
immediately.
will complete the stitch and cut the threads before
stitch. Your machine ties off the thread, cuts the
needle and bobbin threads and raises the presser
foot and the needle.
Note: Threads are cut automatically when buttonholes
are sewn with the Sensormatic buttonhole foot.
The presser foot will not raise after thread snips if
automatic presser foot lift has been deactivated in the
settings menu.
Thread snips performed by the machine can be cancelled
in the settings menu.
Reverse button
pressed.
end and tapering stitches.
Reverse indicator
Action indicator
indicator stays lit until the action is done.
Reverse button
Reverse indicator
Action indicator
Start/stop
Presser foot up and extra lift toggle
Thread snips
Presser foot down and pivot toggle
Stitch restart
Immediate tie-off
Needle up/down
Speed control