Pfaff select 3.2 Owner's Manual - Page 14
Winding the bobbin from the, second spool pin
View all Pfaff select 3.2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
C Operate your sewing machine Winding the bobbin from the second spool pin Push the second spool pin (8) into its hole. Slide on a spool cap and place the thread spool on the spool pin. Threading Place the thread into guide A and pull it through opening B to the right under hook C. Wind the thread clockwise a few times around the bobbin. Winding Switch on the main switch (1). Hold the end of thread firmly and press the the foot control. The winding action will stop automatically as soon as the bobbin is full. Cut the thread, push the bobbin to the left and remove it. Don't forget: Turn the handwheel release disk (3) back again. Then turn the handwheel (4) towards you until it snaps into place. TIP: If the machine is already threaded, you can easily wind thread from the second spool pin without having to unthread the machine. B A 14