Philips 19PFL3505D User manual - Page 18

English Using your TV as a PC monitor Use a VGA connector to connect a PC to your TV. For sound, add an audio cable with a stereo mini jack. Caution • Before you connect your PC, set the PC monitor refresh rate to 60Hz. Supported screen resolutions The following screen resolutions are supported in PC mode : Resolution 640 x 480 800 x 600 1024 x 768 1280 x 768 1360 x 768 Refresh rate 60Hz 60Hz 60Hz 60Hz 60Hz Changing sound settings 1 Press MENU on the remote control and select [Sound]. Picture Sound Setup Features Language Auto Sound Equalizer Auto Volume Leveling TV Speakers Audio Setting Standard Off Speakers EasyLink Stereo 2 Press Î or ï to highlight a sound setting and press OK to select the setting. 3 Adjust the following items. [Auto Sound] Press Î or ï to select the desired setting, then press OK. ([Personal], [Standard], [Movie], [Music] and [News]) [Equalizer] Adjust tone quality for each frequency. Press Í or Æ to select the specific frequency, then press Î or ï to adjust the level. [Auto Volume Leveling] Auto Volume Leveling keeps a constant loudness differential between the TV commercials and the programs. Press Î or ï to select the desired option, then press OK. On Select if you want to reduce volume differences between the TV commercials and the programs. Off Select if you want to invalidate the Auto Volume Leveling. [TV Speakers] This option will allow you to select the audio output from the unit's speakers. If you have an amplifier which is compatible with the CEC function connected to this unit using an HDMI cable, some sound operations such as volume up can be used with this unit's remote control. Press or On Off Speakers EasyLink to select the desired option, then press OK. Sound will come from the TV's speakers. No sound will come from the TV's speakers. This function allows you to control audio output from EasyLink compliant device with the TV's remote control. [Audio Setting] You can set the output mode as a default for the sound mode (NTSC only). This setting is not interlocked when you change the output mode by pressing SAP. (see 'Switching audio mode' on page 14). Press or to select the desired option, then press OK. Stereo Mono SAP Outputs stereo-audio Outputs mono-audio Outputs second audio program 4 Press MENU to exit. Summary of sound settings The following sound settings can be configured. Depending on the sound source, some sound settings are not available. • [Auto Sound] : Sets all sound settings to the factory default. • [Equalizer] : Adjusts individual sound frequencies. • [Auto Volume Leveling] : Reduces sudden changes in volume, for example, during commercials or when switching channels. Select [On] or [Off]. • [TV Speakers] : Select [On] or [Off], or output sound to an EasyLink compliant device.When [Speakers EasyLink] is selected, the TV speakers are disabled and TV sound outputs to the speakers of the compatible EasyLink compliant device. Adjust the volume using the unit's remote control. Changing auto sound mode 1 Press AUTO SOUND to set your TV to a predefined sound setting. 2 Press or to select one of the following settings : • [Personal] :The customized settings you defined by using the [Sound] menu. • [Standard] : For normal TV viewing. • [Movie] : Realistic sound settings for a cinematic experience. • [Music] : Emphasize high and low freq. for instrument sound. • [News] : Clear sound settings for human voice. EN 17