Philips 243V5LHSB5 User manual - Page 4
Notational Descriptions
View all Philips 243V5LHSB5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
1. Important ness, avoid the fluorescent lighting, and surfaces that don't reflect too much light. • Seeing a doctor if your symp-toms. Maintenance • To protect your monitor from possible damage, do not put excessive pressure on the LCD panel. When moving your monitor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the LCD panel. • Unplug the monitor if you are not going to use it for an extensive period of time. unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content. Uninterrupted display of still or static images over an extended period may cause "burn in", also known as "after-imaging" or "ghost imaging", on your screen. "Burn-in", "after-imaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology. In most cases, the "burned in" or "after-imaging" or "ghost imaging" will disappear gradually over a period of time after the power has been switched off. • Unplug the monitor if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your monitor. • To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or excessive moisture environment. • If your monitor gets wet, wipe it with dry cloth as soon as possible. • If foreign substance or water gets in your monitor, please turn the power off immediately and disconnect the power cord.Then, remove the foreign substance or water, and send it to the maintenance center. • Do not store or use the monitor in locations exposed to heat, direct sunlight or extreme cold. Warning Failure to activate a screen saver, or a periodic screen refresh application may result in severe" burn-in" or "after-image" or "ghost image" symptoms will not disappear and cannot be repaired.The damage mentioned above is not covered under your warranty. Service • The casing cover should be opened only by qualified service personnel. • If there is any need for any document for repair or integration, please contact with your local service center. (Please refer to Service contact information listed in Important information manual.) • For transportation information, please refer to "Technical Specifications". • Do not leave your monitor in a car/trunk under direct sun light. • In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor in a location that falls within the following temperature and humidity ranges. • Temperature: 0-40°C 32-104°F Note Consult a service technician if the monitor does not operate normally, or you are not sure what procedure to take when the operating instructions given in this manual have been followed. • Humidity: 20-80% RH Important information for Burn-in/Ghost image • Always activate a moving screen saver program when you leave your monitor 1.2 Notational Descriptions The following subsections describe notational conventions used in this document. Notes, Cautions and Warnings 2