Philips 42PF5421D User manual - Page 28
Connect Accessory Device, Set Top Box to TV, Set-Top Box to TV
View all Philips 42PF5421D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
English Française Connect Accessory Devices 1a Set Top Box to TV CABLE / ANTENNA 1b Set-Top Box to TV Clear region ratings This function allows you to clear all the Region Ratings settings. & Select Clear region ratings with the cursor down. é Press the cursor right to enter the list. You are asked to enter your code. (See below). Set/Change PIN & Select Set or Change PIN with the cursor down. é If no PIN-code exists yet, the menu item is set to Set PIN. Follow the instructions on screen. If a PIN-code has previously been entered, the menu item is set to Change PIN. Follow the instructions on screen. All number combinations from 0000 to 9999 are valid numbers. " The Menu preferences menu reappears with a message confirming that the PIN has been created. " Select Start now. ' Press ok to activate. Note : The above 2 features (Region ratings lock and Clear region ratings) will be available only in sets manufactured after the cut-off timeline, specified by the FCC mandate. Using HDMI Connect RF cable from wall to input at back of the cable box. Set output switch on set-top box to CH 3 or 4 and tune TV to same channel. In some cases, cable box will automatically tune to channel 3 or 4. Just change channels until picture appears. Connect cable box to TV using HDMI cable. Note : If the accessory device has DVI output only, use a DVI to HDMI adapter cable to connect to the HDMI connector. You need to also connect the audio cable to L and R AUDIO jacks. Next, go to Menu => Setup => Source => Analog Audio In => and select HDMI. Using RF Cable Connect RF cable from wall to input at the back of the cable box. Use second RF to connect the cable box to the TV's antenna input. This connection gives mono sound. For stereo sound use also composite audio/ video connection (Refer to panel 3). Using Component Video Input Connect Component Video cable to input at back of the cable box. Turn on TV and DVD Player/DVD recorder. Press CH+ or CH- on remote control to tune to the video supplied by AV2. Insert a prerecorded DVD into DVD player/DVD recorder and press PLAY to verify correct connection. Español () AUDIO OUT (DIGITAL) CABLE / ANTENNA 20