Philips 50PFL5604 User manual - Page 13
Connecting antenna or cable / satellite / IPTV set-top box
View all Philips 50PFL5604 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Connecting antenna or cable / satellite / IPTV set-top box Be sure your antenna or another device is connected properly before plugging in the AC power cord. If connecting to an antenna through an RF cable Any DTV programs that are broadcast in your area can be received for free through an antenna connection. Cable Antenna IN RF cable OUT If connecting cable / satellite / IPTV set-top box using an RF cable If the TV is connected to a cable / satellite set-top box via a coaxial connection, set the TV to channel 3/4 or the channel specified by the service provider. Antenna IN RF cable IN OUT RF cable Set-top box If connecting cable / satellite / IPTV set-top box using an HDMI cable If the TV is connected to a cable / satellite set-top box via an HDMI cable, make sure you select the correct source by using w (INPUT). IN HDMI cable RF cable e OUT IN Set-top box 13 .English Connecting a cable / satellite / IPTV set-top box, Bluray Disc™ / DVD recorder via composite connectors and analog audio Do not place your recorder too close to the screen because some recorders can be susceptible to harmful interference from the TV. Satellite RF cable IN Cable Cable IN RF cable IN Set-top box OUT Video + Audio (L/R) cables OUT Video + Audio IN IN (L/R) cables OUT Blu-ray Disc™ / DVD recorder Note(s) ● If you have any question about the DTV's antenna, visit www.antennaweb.org for further information. ● Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters) for HDTV signal. The minimum RF bandpass on these devices is 2,000 MHz or 2 GHz. ● For your safety and to avoid damage to this unit, please unplug the RF coaxial cable from the antenna input jack before moving the unit. ● If you did use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be more effective than a set-top box or inside antenna. ● To turn on your reception source easily between antenna and cable, install an antenna selector. ● If you are not receiving a signal from your cable service, contact the cable provider. Plugging in the AC power cord Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are made. Caution(s) ● Connect the analog audio signal cables from the external device to the analog audio L/R input jacks. ● If you have an amplifier, connect the HDMI cable to the HDMI input via your amplifier. Note(s) ● Each time you plug in the AC power cord, no operations will be performed for several seconds. This is not a malfunction. Continued on next page.