Philips AT920 User manual - Page 6

10 ENGLISH LED Multi-Purpose Display The display provides the following information: C ◗ Charging Indicator -When the razor is charging, the white battery symbol blinks. C ◗ Full Charge Indicator -When the battery is fully charged, the white battery symbol lights up continuously. After approximately 30 minutes the battery symbol goes off to save energy. C ◗ Low Battery Indicator -When the battery is almost empty (5 or less shaving minutes left), the orange battery symbol blinks.When you turn the razor OFF the orange battery symbol continues to blink for a few seconds. C w Quick Charge Indicator -When you charge the empty battery, the battery symbol and blinks white and orange. After approximately 3 minutes, the battery symbol continues to blink white. - The razor now contains enough energy for a 5-minute shave. C w Razor Head Replacement Indicator -Once a year, depending on your shaving behavior, the razor head replacement symbol will light up orange continuously, as a reminder to replace the razor heads. ENGLISH 11 Before First Use ◗ Charge the razor before you start using it (see 'Charging'). Make sure the razor is switched off before you start charging it. Important ◗ Only use the power cord provided to charge the razor. ◗ The power plug transforms 100-240V AC to less than 24V DC. Charging ◗ Charging or recharging at temperatures below 40ºF or higher than 95ºF adversely affects lifetime of batteries. ◗ If the razor is subjected to a major change in temperature, pressure or humidity, let it acclimatize for 30 minutes before using. ◗ Charging or recharging requires one full hour. ◗ A fully charged razor has a cordless shaving time of up to 60 minutes. ◗ When charging razor for the first time or after a long period of non-use, charge until the white battery symbol lights up continuously. ◗ Do not charge razor in a pouch.