Philips CDC775BK User manual - Page 6

Playback

Page 6 highlights

pg 09-21/CDC775/17-Eng 2/16/00 9:26 AM Page 14 English PLAYBACK Inserting the CDs NOTE! Use only audio CD; audio CD-R or audio CD-RW. • Press POWER-ON/OFF to switch the changer on. - The changer will now start CD detection to check how many CDs there are in the CD compartment. The turntable will rotate slowly until all positions (1 - 5) in the CD compartment have been checked. - The position which is being checked is always shown on the display (dISC X). - After CD detection the 1 - 5 CD number indicator will show the number of CDs in the CD compartment. • Open the CD compartment by pressing OPEN/CLOSE. - OPEN lights up. • Insert the CDs, printed side up; use the LOAD button to rotate the turntable in the CD compartment. • Close the compartment by pressing OPEN/CLOSE. - CLOSE lights up. The changer will start CD PREFERRED POSITION QUICK PLAY LOAD detection again. NOTE! - CD detection may never be interrupted. If, during detection, you press any button, then the changer will stop detection and the display will give an incorrect indication of the number of CDs in the CD compartment. - Always remove all CDs from the CD compartment if you want to transport the changer. Normal Playback (PLAY 2) - The display shows the number of the current CD. 321 • Press PLAY 2 to start playback. - The CD number indicator (1-5) always shows what CD is being played (B X flashes). - The track being played and its elapsed playing time are shown under TRACK and TRACK TIME. See 'CALLING UP INFORMATION ON THE DISPLAY' if you wish to see other information on the display. TRACK TRACK TIME 1 - Play will stop after all CDs have been played. • Press POWER-ON/OFF to switch the changer off. Quick Play • Use the PREFERRED POSITION in the CD compartment if you wish to insert only one CD and then start play by pressing the QUICK PLAY button. Play will then start immediately with the inserted CD. PREFERRED POSITION QUICK PLAY LOAD NOTE! - You can also press PLAY 2 immediately after in- serting the CDs; the compartment then closes automatically and play starts from the first available CD. - You can interrupt playback by pressing PAUSE ;; PAUSE then lights up. Press PLAY 2 or PAUSE ;; to restart. - If you press PLAY 2 during play, the current track will start again from the beginning. - You can stop playback by pressing STOP 9. - If you press OPEN/CLOSE during play, the CD compartment will open while play continues. The three CDs outside the changer may now be changed without playback being interrupted. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13

Inserting the CDs
NOTE!
Use only audio CD; audio CD-R or audio CD-RW.
• Press
POWER-ON/OFF
to switch the changer on.
The changer will now start CD detection to check how
many CDs there are in the CD compartment. The
turntable will rotate slowly until all positions
(1 - 5)
in the CD compartment have been checked.
The position which is being checked is always shown
on the display (
dISC
X
).
After CD detection the 1 - 5 CD number indicator will
show the number of CDs in the CD compartment.
Open the CD compartment by pressing
OPEN/CLOSE
.
OPEN
lights up.
Insert the CDs,
printed side up;
use the
LOAD
button to rotate the turntable
in the CD compartment.
Close the compartment by
pressing
OPEN/CLOSE
.
CLOSE
lights up. The
changer will start CD
detection again.
NOTE!
CD detection may never be interrupted. If, during
detection, you press any button, then the changer
will stop detection and the display will give an
incorrect indication of the number of CDs in the CD
compartment.
Always
remove all CDs from the CD compartment if
you want to transport the changer.
Normal Playback (PLAY
2
)
The display shows the number of the current CD.
• Press
PLAY
2
to start playback.
The CD number indicator (1-5) always shows what CD
is being played (
B
X
flashes).
The track being played and its elapsed playing time
are shown under TRACK and TRACK TIME.
See 'CALLING UP INFORMATION ON THE DISPLAY' if
you wish to see other information on the display.
Play will stop after all CDs have been played.
• Press
POWER-ON/OFF
to switch the changer off.
Quick Play
Use the PREFERRED POSITION
in the CD compartment if you
wish to insert only one CD and
then start play by pressing the
QUICK PLAY
button. Play will
then start immediately with
the inserted CD.
NOTE!
You can also press PLAY
2
immediately after in-
serting the CDs; the compartment then closes
automatically and play starts from the first available
CD.
You can interrupt playback by pressing PAUSE
;
;
PAUSE then lights up. Press PLAY
2
or PAUSE
;
; to
restart.
If you press PLAY
2
during play, the current track will
start again from the beginning.
You can stop playback by pressing STOP
9
.
If you press OPEN/CLOSE during play, the CD
compartment will open while play continues. The
three CDs outside the changer may now be changed
without playback being interrupted.
TRACK
TRACK
TIME
1
1
3
2
14
English
PLAYBACK
LOAD
QUICK PLAY
PREFERRED
POSITION
LOAD
QUICK PLAY
PREFERRED
POSITION
pg 09-21/CDC775/17-Eng
2/16/00
9:26 AM
Page 14