Philips DC390/37 User Manual - Page 17

5 Listen to radio Note •• Only FM radio reception is available on this unit. Tune to a radio station Tip •• Position the antenna as far as possible from TV, VCR or other radiation source. Note •• For optimal reception, fully extend and adjust the position of the antenna. 1 Press TUNER to select FM tuner. 2 Press and hold / for more than 2 seconds. »» [SRCH] (search) is displayed. »» The radio tunes to a station with strong reception automatically. 3 Repeat step 2 to tune to more stations. • To tune to a weak station, press / repeatedly until you find optimal reception. Program radio stations automatically You can program a maximum of 20 preset radio stations. 1 In the tuner mode, press and hold SET TIME/PROG for more than 2 seconds to activate automatic program mode. »» [AUTO] (auto) is displayed. »» The unit automatically stores radio stations with sufficient signal strength.. »» The first programmed radio station is broadcast automatically. Program radio stations manually You can program a maximum of 20 preset radio stations. 1 Tune to a radio station. 2 Press SET TIME/PROG to activate the program mode. 3 Press / to select a number. 4 Press SET TIME/PROG to confirm. 5 Repeat the above steps to program other stations. Tip •• To overwrite a programmed station, store another station in its place. •• To select FM stereo or FM mono, press OK. Select a preset radio station 1 Press / to select a preset number. 16 EN