Philips DC912 User manual - Page 9

Preparations English Connections The type plate is located at the bottom of the system. A Power ● Before connecting the AC power adaptor to the wall outlet, ensure that all other connections have been made. ● DC jack is located at the bottom panel of the set. WARNING! - Use the supplied AC power adaptor only! Using any other power connection device may damage your main set! - For optimal performance, use only the original AC power adaptor. - Never make or change connections with the power switched on. To avoid overheating of the system, a safety circuit has been built in. Therefore, your system may switch to Standby mode automatically under extreme conditions. If this happens, let the system cool down before reusing it (not available for all versions). B Connecting the wireless subwoofer 1 Place the subwoofer on the floor near an AC outlet. 2 Connect the power cord of the subwoofer to the AC outlet. ➜ The LED indicator on the subwoofer's back panel light up blue. 3 Power on both the main set and subwoofer. ➜ Wireless connection will set up automatically. ➜ "NOT PAIR" will be displayed at inverals of 10 seconds if wireless connection fails to set up. In case the wireless connection fails due to conflict or strong interference etc., you may need the following procedures for manual pairing: 1 In standby mode, press and hold 2; on the set for three seconds to activate signal transmitting. ➜ "PAIR" flashes on the display screen. 9