Philips DCM3020 User manual - Page 18

7 Other features Set the sleep timer This unit can switch to standby automatically after a set period of time. When the unit is turned on, press SLEEP repeatedly to select a set period of time (in minutes). » When sleep timer is activated, the display shows [SLEEP](sleep) . To deactivate sleep timer Press SLEEP repeatedly until "OFF" is displayed. » When sleep timer is deactivated, [SLEEP](sleep) disappears on the display. Set the alarm timer This unit can be used as an alarm clock. The DISC, TUNER, USB or iPhone/iPod/iPad is activated to play at a preset time. 1 Ensure that you have set the clock correctly. 2 Press and hold TIMER. 3 Press SOURCE to select a source. 4 Press TIMER to confirm. » The hour digits are displayed and begin to blink. 5 Press / to set the hour. 6 Press TIMER to confirm. » The minute digits are displayed and begin to blink. 7 Press / to set the minute. 8 Press TIMER to confirm. » The timer is set and activated. Activate and deactivate the alarm timer Press TIMER repeatedly to activate or deactivate the timer. » If the timer is activated, the display shows . » If the timer is deactivated, disappears on the display. Note • If DISC/USB/iPhone/iPod/iPad source is selected and the track cannot be played, tuner is activated automatically. Play from external audio device You can play from an external audio device such as MP3 player through this unit. 1 Connect the audio device. • For audio device with red/white audio output sockets: Connect a red/white audio cable (not supplied) to the AUX-IN sockets and to the audio output sockets on the audio device. • For audio device with headphone sockets: Connect the supplied MP3-Link cable to the MP3-LINK socket and to the headphone socket on the audio device. 2 Press SOURCE to select MP3-LINK/ AUX-IN source. 3 Play the device. Adjust display brightness Press DIM repeatedly to select different levels of display brightness: • High brightness • Mid brightness • Low brightness EN 19