Philips DS9800W User manual - Page 11

3 Prepare $OZD\VIROORZWKHLQVWUXFWLRQVLQWKLVFKDSWHULQ sequence. Connect Connect speaker cables Note ‡ Insert the stripped portion of each speaker wire into the socket completely. ‡ For optimal sound, use the supplied speakers only. 5 Screw the left black (-) connector to secure the cable. 6 Repeat steps 2-5 to insert the other speaker cable into the right connectors. Connect power Caution ‡ Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the unit. ‡ 5LVNRIHOHFWULFVKRFN:KHQ\RXXQSOXJWKH$&FRUG always pull the plug from the socket. Never pull the cord. ‡ %HIRUH\RXFRQQHFWWKH$&FRUGPDNHVXUHWKDW\RX have completed all the other connections. 1 2 3 1 Unscrew the speaker connectors. 2 Insert fully the end of a speaker cable with red mark into the left red (+) connector. 3 Screw the left red (+) connector to secure the cable. 4 Insert fully the end of a speaker cable without red mark into the left black (-) connector. ‡ &RQQHFWWKH$&SRZHUFRUGWR ‡ the ~ AC IN socket on the back of the main speaker. ‡ the wall power socket. Turn DS9800W on $IWHUSURSHUSRZHUFRQQHFWLRQWKHXQLW switches on automatically. ‡ Wait for successful boot-up of the unit. » The boot-up takes about 35 seconds. » During boot-up, the LED indicator on the back of the unit blinks green quickly. EN 11