Philips DVP3602 User manual - Page 13

English Accessories supplied • Remote control and one battery • User Manual Laser specification • Type: Semiconductor laser InGaAIP (DVD), AIGaAs (CD) • Wave length: 658 nm (DVD), 790 nm (CD) • Output Power: 7.0 mW (DVD), 10.0 mW (VCD/CD) • Beam divergence: 60 degrees 6 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the player. To keep the warranty valid, never try to repair the player yourself. If you have problems using this player, check the following points before you request service. If you still have a problem, get support at www.philips.com/support. . If you contact Philips, you will be asked for the model and serial number of this player.The model number and serial number are on the back of this player.Write the numbers here: Model No Serial No No picture. • Refer to the TV user manual for how to select the correct video input channel. • If you have turned on the progressive scan or changed a TV system setting, switch back to the default setting: 1) Press to open the disc compartment. 2) Press DISC MENU (for progressive scan) or SUBTITLE (for TV system). No sound output from the TV. • Make sure that the audio cables are correctly connected between this player and the TV. No audio output from the loudspeakers of the connected external audio device (for example, stereo system, amplifier receiver). • Make sure that the audio cables or coaxial cable are correctly connected. • Switch the external audio device to correct audio input source. Disc cannot be read. • Make sure that this player supports the disc (see "Specifications" > "Playable media"). EN 13