Philips FWD798 Quick start guide - Page 2
Detailed playback features and additional functions are described in the, accompanying owner's - din cable
View all Philips FWD798 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Make sure your DVD system and TV are connected and turned on! Plug & Play 1 Turn on the system. "AUTO INSTALL - PRESS PLAY" will be displayed. 2 Press PLAY 2; on the system to start installation. Playing a disc 3 Press DISC1/2/3 on the remote control. You can also select the DISC (DISC10203) on the front panel. 4 Turn on the TV and select the correct Video In mode. You should see the blue Philips DVD background screen on the TV (If no disc in the DVD system). 5 Press OPEN0CLOSE 0 on the front of the DVD system and load discs, then press the corresponding OPEN0CLOSE 0 again to close the disc tray. Make sure the disc label is facing up. For double-sided discs, load the side you want to play face down. 6 Playback will start automatically. If a disc menu appears, use 1/¡/5/4 buttons on the remote to make the necessary selection, then press OK to confirm. Or, use the numeric keypad on the remote to select features. Follow the instructions given in the disc menu. 7 To stop playback, press STOP 9. Region Codes DVDs must be labeled for ALL regions or Region 1, in order to play on this DVD system. 1 ALL You should find the below accessories in the packaging box. Audio cables (white, red) Component video cables (red, blue, green) AM loop antenna FM wire antenna Composite video cable (yellow) AA size batteries DIN out cable AC power cable Detailed playback features and additional functions are described in the accompanying owner's manual