Philips FWM70 Quick start guide - Page 2

Plug and Play, Timer Operations, Loading discs - 22

Page 2 highlights

For more detailed instrustions, see the following pages in the User Guide. A Plug and Play 1 Gameport Operations 15 Basic Operations 16~17 Disc Operations 18~20 1 When you turn on the mains supply, "AUTO INSTALL - PRESS PLAY" is displayed. Tuner Operations 21 Tape Operations/Recording ... 22~23 2 PressÉÅ on the system to start installation. Timer Operations 24~25 ➜ "INSTALL" is displayed, followed Troubleshooting 27 by "TUNER" and "AUTO". ➜ PROG starts flashing. ➜ When all the available radio stations are stored or the memory for 40 presets are used, the last preset radio station (or the first available RDS station) will be played. 2 B Timer Operations 1 Press and hold CLK/TIMER (or CLOCK•TIMER on main unit) until "SELECT CLOCK OR TIMER" is displayed. 4 2 Press -/+ to change the display to "TIMER" and press CLOCK•TIMER again to confirm. 3 Press CD or TUNER or TAPE to select the wake-up source. 4 Press 4 or ¢ (for hours) and - or + (for minutes) repeatedly to set the wake-up time. 5 Press CLOCK•TIMER to store the setting. To exit without storing the setting ● Press Çon the system. 2,4 1,2,5 3 C Loading discs 1 Press OPEN•CLOSE 0 on the main unit to open the disc trays. 2 Load a disc with the label side facing up. 3 Press OPEN•CLOSE 0 again to close the disc tray. 4 Press ÉÅ to play the CD. 2 1,3 4

  • 1
  • 2

A
For more detailed
instrustions, see the following
pages in the User Guide.
Gameport Operations
...................
1
5
Basic Operations
......................
1
6
~1
7
Disc Operations
........................
1
8
~
20
Tuner Operations
..................
...........
21
Tape Operations/Recording ...22~23
Timer Operations
....................
24~25
Troubleshooting
...............................
27
Plug and Play
2
1
B
Timer Operations
2
1
3
4
5
C
Loading discs
2
1
3
When you turn on the mains supply,
"
AUTO INSTALL
-
PRESS PLAY
" is
displayed.
Press
OPEN•CLOSE
0
on the main unit to open
the disc trays.
Load a disc with the label side facing up.
Press
OPEN•CLOSE
0
again to close the disc tray.
Press and hold
CLK/TIMER
(or
CLOCK•TIMER
on main
unit) until “
SELECT CLOCK OR TIMER
” is displayed.
Press
/+
to change the display to “
TIMER
” and press
CLOCK•TIMER
again to confirm.
Press
4
or
¢
(for hours) and
or
+
(for minutes)
repeatedly to set the wake-up time.
To exit without storing the setting
Press
Ç
on the system.
Press
CLOCK•TIMER
to store the setting.
4
Press
ÉÅ
to play the CD.
Press
ÉÅ
on the system to start
installation.
"
INSTALL
" is displayed, followed
by "
TUNER
" and "
AUTO
".
PROG
starts flashing.
When all the available radio
stations are stored or the
memory for 40 presets are used,
the last preset radio station (or
the first available RDS station) will
be played.
Press
CD
or
TUNER
or
TAPE
to select the wake-up
source.
1
2
1,2,5
2,4
4
3
2
1,3
4