Philips FWP750 User manual - Page 12

English Dolby Pro Logic ➜ "TEST TONE" followed by "ADAPT BALANCE, CENTER AND REAR LEVEL" will be displayed. ➜ The test signal will last for about 90 seconds. Adjust the sound level -+-+ Front speakers G Press BALANCE L on the remote control for left speaker and press BALANCE R on the remote control for right speaker. ➜ "BAL L +XX" or "BAL R +XX" will be displayed. Center speaker G Press CENTER + or - on the remote control. ➜ "CENT +XX" or "CENT-XX" will be displayed. Surround speakers G Press REAR + or - on the remote control. ➜ "REAR +XX" or "REAR -XX" will be displayed. To switch off the TEST TONE G Press TEST TONE and then DPL on the remote control. Notes: - It is advisable to set the speakers' level at normal listening level. - "XX" denotes the sound level. Switching the Dolby Pro Logic G Press PRO LOGIC (DPL) repeatedly to select and cycle through the various sound modes. ➜ The Dolby Pro Logic display panel will light up with the selection. PRO LOGIC Dolby Surround ➜ Dolby Center Phantom ➜ Dolby 3 Stereo ➜ Stereo ➜ Dolby Surround ... Dolby Surround This setting is for a full Dolby Surround Pro Logic mode. ➜ "DOLBY SURROUND" will be displayed. L LEFT S C CENTER SURROUND SPEAKERS R RIGHT S Dolby Center Phantom This setting is for use without the center speaker. It redistributes the center speaker L LEFT S C CENTER SURROUND SPEAKERS R RIGHT S sound to the left and right speakers, providing conventional stereo across the front. ➜ "DOLBY CENTER PHANTOM" will be displayed. Dolby 3 Stereo Use this setting when full surround is not required, but a wide stereo sound is desired. It requires L LEFT S C CENTER SURROUND SPEAKERS R RIGHT S only the left, right and center speakers. ➜ "DOLBY 3 STEREO" will be displayed. Normal Stereo This setting is for normal stereo sound without Dolby Pro Logic. It requires only the left and L LEFT S right speakers. ➜ "STEREO" will be displayed. C CENTER SURROUND SPEAKERS R RIGHT S 12 pg 001-031/P750/37-Eng 12 3/7/01, 4:12 PM 3139 115 20621