Philips HSB2351 User manual - Page 13
Option 3: Connect through, component - Higher quality, Option 2: Connect through HDMI, Highest
UPC - 609585172241
View all Philips HSB2351 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
TV VIDEO IN TV 1 Connect one end of the AV cable (red/ white/yellow) to the AV input sockets on the TV. 2 Connect the other end to the AV OUT (VIDEO , AUDIO L/R) sockets on the unit. Note • If you want to listen to sound from the unit instead of from TV, connect the video cable (yellow) only. Do not connect the audio cable (red and white). Option 2: Connect through HDMI Highest quality If you want to experience full high-definition video, use HDMI connection. HDMI provides an uncompressed, digital interface between your TV and the unit. Both audio and video signals are combined in one HDMI cable. Note • To use Philips EasyLink, you must use HDMI connection (see "Use Phlips EasyLink"). • This unit is HDMI CEC compatible. It enables the connected TV/device to control each other over HDMI. HDMI IN a Connect an HDMI cable (not supplied) to: • - the HDMI socket on this unit. • - the HDMI input socket on the TV. Tip • If your TV has only a DVI connection, connect through a HDMI/DVI adaptor. An extra audio connection is needed to complete this connection. Option 3: Connect through component - Higher quality Component video provides better picture quality than AV out connections.Though component video supports high-definition signals, picture quality is lower than HDMI and is analogue. 14 EN