Philips HTS3555 User manual - Page 16
Step 3: Connecting the FM, and AM/MW antennas
UPC - 609585130005
View all Philips HTS3555 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
English Basic Connections (continued) AM/MW antenna FM antenna 2 x the claw Antenna into the slot 1 DOCK Option 5: Using an accessory RF modulator If your TV has only a single Antenna Input jack (labeled as 75 ohm or RF In,) you need an RF modulator in order to view the DVD playback on the TV. See your electronics retailer or contact Philips for details about RF modulator availability and operations. A Use the supplied composite video cable (yellow) to connect the main unit's CVBS jack to the video input jack on the RF modulator. B Use an RF coaxial cable (not supplied) to connect ANTENNA OUT or TO TV jack on the RF modulator to the ANTENNA IN jack on the TV. C Connect the Antenna or Cable TV service signal to the ANTENNA IN or RF IN jack on the RF modulator. (It may have been connected to your TV previously. Disconnect it from the TV.) Step 3: Connecting the FM and AM/MW antennas A Connect AM/MW loop antenna (not supplied) to the AM/MW jack. Place the AM/MW loop antenna on a shelf, or attach it to a stand or wall. B Connect the supplied FM antenna to the FM 75 Ω jack. Extend the FM antenna and x its ends to the wall. For better FM stereo reception, connect an external FM antenna (not supplied.) Helpful Hints: - Adjust the position of the antennas for optimal reception. - Position the antennas as far away as possible from your TV, VCR or other radiation source to prevent any unwanted interference. 16