Philips LX800037 User manual - Page 26
Radio Reception
View all Philips LX800037 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
English Radio Reception Plug and Play Plug and Play allows you to store all available radio stations automatically. First time setup/power up 1 When you turn on the power, "AUTO INSTALL - PRESS PLAY" is displayed. 2 PressÉÅ on the system to start installation. ➜ "INSTALL TUNER" is displayed, followed by "AUTO PROGRAM". ➜ The system will automatically store the radio stations with sufficient signal strength, starting with FM band and followed by AM band. Weak radio stations may be stored in later presets. ➜ When all the available radio stations are stored or the memory for 40 presets is used, the last preset radio station will be played. To reinstall the Plug and Play 1 In standby mode, hold downÉÅon the system until "AUTO INSTALL - PRESS PLAY" is displayed. 2 PressÉÅagain to start installation. ➜ All previously stored radio stations will be replaced. To exit the Plug and Play q Press Ç on the system. ➜ If you do not complete the Plug and Play installation, the function will be restarted when you turn on the power again. Notes: - If no stereo frequency is detected during Plug and Play, "CHECK ANTENNA" will be displayed. - During Plug and Play, if no button is pressed within 15 seconds, the system will exit Plug and Play mode. Tuning to radio stations 1 Press SOURCE to select TUNER mode (or TUNER on the remote control. 2 Press TUNER again to select the desired band : FM or AM. 3 Hold down S or T until the frequency indication starts to change, then release. ➜ The system automatically tunes to the next strong signal radio reception. q To tune to a weak station, press S or T briefly and repeatedly until an optimal reception is found. 4 Repeat step 3 if necessary until you find the desired radio station. Presetting radio stations You can preset up to 40 radio stations in the memory. Automatic preset from a desired preset number 1 In tuner mode, press 1 or 2 or use the numeric keypad (0-9) to select the desired preset number. 2 Hold down PROG until "AUTO PROGRAM" is displayed. ➜ If a radio station has been stored in one of the presets, it will not be stored again under another preset number. ➜ If no preset number is selected, automatic preset will begin from preset (1) and all your former presets will be overridden. To exit the preset setting q Press PROG or Ç on the system. Manual preset of favorite radio stations 1 Tune to your desired radio station (refer to "Tuning to radio stations"). 2 Press PROG twice. ➜ The preset number starts flashing. 3 Press 1 or 2 or use the numeric keypad (0-9) on the remote control to select the desired preset number. 4 Press PROG again to store the radio station. q Repeat steps 1-4 to store other radio stations. 5 To exit, press Ç. Notes: - If you attempt to program more than 40 preset radio stations, "PROGRAM FULL" is displayed. - During programming, if no key is pressed within 15 seconds, the system will exit the program mode automatically. 26 RADIO RECEPTION