Philips MC-220 User manual - Page 13

English Basic Functions Adjusting volume and sound STANDBY-ON PROGRAM TIMER ON OFF CLOCK REPEAT REV MODE BAND SHUFFLE SIDE A/B SOURCE SELECT 1 Turn the VOLUME control anti-clockwise to decrease or clockwise to increase volume on the system (or press VOL -/+ on the remote control). ➜ Display shows the volume level VOL and a number from 0-32. RECORD PLAY•PAUSE PREV NEXT STOP iR 2 Press DSC repeatedly to select the desired sound effect: CLASSIC (no indication)/ ROCK ( ) / JAZZ ( ) / POP ( ). IMPORTANT! Before you operate the system, complete the preparation procedures. Switching the system on G Press 2 STANDBY ON or SELECT SOURCE. ➜ The system will switch to the last selected source. G Press CD, TUNER, TAPE or AUX on the remote control. ➜ The system will switch to the selected source. To switch the system to standby mode G Press 2 STANDBY ON on the system or remote control. G If in recording mode, press STOP 9 first. ➜ The volume level, interactive sound settings, last selected source and tuner presets will be retained in the player's memory. Power-saving automatic standby As a power-saving feature, the system automatically switches to standby 15 minutes after a tape or CD has reached the end and no control is operated. 3 Press DBB to switch bass enhancement on or off. ➜ Display shows: DBB if the DBB is activated. 4 Press INCREDIBLE SURR. (IS on the remote control) to switch the surround sound effect on or off. ➜ Display shows: if activated. Note: - The effect of INCREDIBLE SURROUND may vary with different types of music. 5 Press MUTE on the remote control to interrupt sound reproduction instantly. ➜ Playback will continue without sound and the display shows MUTE. DSC DBB MUTE G To activate sound reproduction you can: - press MUTE again; - adjust the volume controls; - change source. 13