Philips MCD139 User manual - Page 25

English Programming favourite tracks For VCDs/CDs You can select and program up to 99 desired tracks for playback in the desired sequence. If you like, store any track/chapter/title more than once. 1 During playback, press 9 twice to fully stop the playback. 2 Press PROG on the remote control (or PRGOGRAM on the system) to activate programming mode. ➜ On the TV screen, "PROGRAM" and "P 00:00" are displayed. ➜ On the system's display, "PRG" flashes, and P00: 00 is displayed. 3 Use the Numeric Keypad (0-9) on the remote control to enter your desired track number. 4 Press OK on the remote to store the track. ➜ P00 is changed to P01 , indicating the first programmed track is stored and the next program sequence is available. 5 Repeat steps 3-4 to store other tracks. ➜ If you attempt to program more than 99 tracks, FULL is displayed, and no track can be stored. 6 PressÉÅto playback the program. ➜ "PRG" is displayed during playback. To Erase program You can erase program by doing one of the following: ● During program playback, press 9 two times. ● Open the disc door. ➜ "PRG" disappears from the display. Helpful hints: - Programming is not available for DVD and MP3 disc. Disc Operations Display information During playback, press DISPLAY on the remote control repeatedly to display various disc playback time on the TV screen ( and the system's display). For DVDs: TITLE ELAPSED - elapsed playback time of current title TITLE REMAIN - remaining time of current title CHAPTER ELAPSED - elapsed playback time of current chapter CHAPTER REMAIN - remaining time of current chapter OFF - turns off the display information For VCDs/CDs ➜ For VCD with PBC feature, PBC must be turned off first. SINGLE ELAPSED - elapsed playback time of current track SINGLE REMAIN - remaining time of current track TOTAL ELAPSED - elapsed playback time of disc. TOTAL REMAIN - remaining playback time of disc OFF - turns off the display information 25