Philips MCD288 Quick start guide - Page 3
Setting the clock, Setting DVD menu options - flash
UPC - 683728072940
View all Philips MCD288 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Setting the clock IMPORTANT! - To set clock in the Eco Power mode, press and hold STANDBY-ON/ECO POWER 2 on the set for 3 seconds or more to switch to normal standby mode first before proceeding with the procedures below. 1 In standby mode, press and hold CLOCK on the remote. 2 When the hour digits flash, press VOLUME-/+ (VOL+/- on the remote) to set the hours. 3 Press CLOCK again and the minute digits flash.Then press VOLUME-/+ (VOL+/- on the remote) to set the minutes. 4 Press CLOCK again to confirm the time setting. Setting DVD menu options IMPORTANT! If the progressive scan feature is activated but the connected TV does not support progressive signals or the cables are not connected accordingly, see the user manual for proper progressive scan setup or deactivate the progressive scan feature as below: 1) Turn off your TV progressive scan mode or turn on to interlaced mode. 2) Press SYSTEM MENU on the remote to exit the system menu and then DISC to exit progressive scan. CLOSED CAPTIONS DIVX(R) VOD Tip See chapters "Preparations" and "System Menu Options" in the User Manual for detailed descriptions. MCD288 QUG_Eng 3 2006.3.15, 16:03