Philips MCM108DB User manual - Page 14

English Basic Functions Adjusting volume and sound 1 Press VOLUME - / + to increase or decrease volume. ➜ Display shows the volume level and a number from 0-32. 2 Press DSC repeatedly to VOLUME select the desired sound effect: OPEN / CLOSE JAZZ / POP / CLASSIC / ROCK. DBB DSC STANDBY-ON SOURCE BAND PROG / CLOCK - VOLUME + TUNING IMPORTANT: Before you operate the system, complete the preparation procedures. Switching the system on ● In Active standby, or Eco standby, press STANDBY-ON (y on the remote control). ➜ The system will switch to the last selected source. ● Press SOURCE (CD, TUNER or DOCK on the remote control). ➜ The system will switch to the selected source. 3 Press DBB (on the remote control) to switch bass enhancement on or off. ➜ Display shows: DBB if the DBB is activated. 4 Press MUTE on the remote control to stop sound play-back instantly. ➜ Playback will continue without sound and the display shows MUTE . ● To start sound playback you can: - press MUTE again; - adjust the volume controls; - change source. To switch the system to standby mode ● Press STANDBY-ON (y on the remote control). ➜ The clock is displayed. To switch the system to Eco-power standby mode ● Press and hold STANDBY-ON (y on the remote control) for more than 2 seconds. ➜ The clock is displayed. Power-saving automatic standby The power-saving feature automatically switches to Eco power standby 15 minutes after a CD playback has ended and no control is operated. Note: - In the Eco power standby, no button, except SOURCE, and STANDBY-ON buttons, can be activated. 14