Philips MCM195 User manual - Page 19

Clock/Timer English DISPLAY/BAND Setting the clock 1 In standby, press CLOCK SET. ➜ The clock digits for the hours flash. 2 Press TUNING 4 ¢ to set the hours. 3 Press CLOCK SET again. ➜ The clock digits for the minutes flash. 4 Press TUNING 4 ¢ to set the minutes. 5 Press CLOCK SET to confirm the time. Note: - The backlight for clock display is off in standby. Activating and deactivating TIMER ● In standby or during playback, press TIMER once. ➜ Display shows if activated, and disappears if deactivated. Activating and deactivating SLEEP The sleep timer enables the system to switch off by itself after a set period of time.The clock time needs to be set first before the sleep timer can be used. ● Press SLEEP on the remote control once or more. ➜ Display shows SLEEP and SLEEP TIME one of the sleep time options in sequence: 60, 45, 30,15, 0, 60... if you have selected a time. ● To deactivate, press STANDBY ON on the system or remote control. ➜ SLEEP disappears from the display. Setting the timer ● The system can be used as an alarm clock, whereby the CD or TUNER is switched on at a set time.The clock time needs to be set first before the timer can be used. 1 In standby or active mode, press TIMER for more than 2 seconds. 2 Press TUNING 4 ¢ to select sound source. 3 Press TIMER to confirm your desired mode. ➜ The clock digits for the hours flash. 4 Press TUNING 4 ¢ to set the hours. 5 Press TIMER again. ➜ The clock digits for the minutes flash. 6 Press TUNING 4 ¢ to set the minutes. 7 Press TIMER to confirm the time. ➜ The timer is now set and activated. 19