Philips MCM2000 User manual - Page 10

English Turn on Press . » The unit switches to the last selected source. Switch to standby mode Press for over 3 seconds to switch the unit to Eco Power Standby mode. » The backlight on the display panel turns off. To switch the unit to standby mode: In Eco Power Standby mode, press for over 3 seconds. » panel. Set clock 1 In standby mode, press PROG/CLOCK SET for 3 seconds to activate clock setting mode. » [CLOCK SET] scrolls on the display, then the time format [24H] and [12H] appears. 2 Press / 12H, then press PROG/CLOCK SET to » The hour digits begin to blink. 3 Press / to set hour, then press PROG/CLOCK SET again. » The minute digits begin to blink. 4 Press / to set minute. 5 Press PROG/CLOCK SET clock setting. Note To exit clock setting mode without storing, press . If no button is pressed in 90 seconds, the system exits clock setting mode automatically. Demonstrate the unit's features In the standby mode, press until "DEMO ON" is displayed. » This system's features are displayed one by one. To turn off the demonstration, press again. Store radio stations automatically If no radio stations are stored, the unit can store radio stations automatically. 1 Turn on the unit. 2 Press RADIO. » [AUTO INSTALL -- PRESS PLAY -STOP CANCEL] (press to start automatic installation, or press to 3 Press . » strength are stored automatically. » After all available radio stations are broadcasts automatically. EN 11