Philips MCM240 User manual - Page 17

English Radio Reception Tuning to radio stations 1 Press SOURCE on the front panel of the system or TUNER on the remote to select TUNER. ➜ TUNER is displayed briefly. 2 Press BAND on the front panel of the system once or more to select your waveband (FM/ AM). 3 Press and hold ALBUM/TUNE à /á (or ALBUM -/+ à /á on the remote). ➜ The radio automatically tunes to a station with sufficient reception. Display indication during automatic tuning: SEARCH. 4 Repeat step 3 if necessary until you find the desired station. ● To tune to a weak station, press ALBUM/ TUNE à /á (or ALBUM -/+ à /á on the remote) briefly and repeatedly until you have found optimal reception. 1 Press PRESETí / ë (or í / ë on the remote) to select the preset number where programming should start. Note: - If no preset number is selected, default is preset (1) and all your presets will be overridden. 2 Press PROGRAM for more than 2 seconds to activate programming. ➜ AUTO is displayed and available stations are programmed in order of waveband reception strength: FM followed by AM. The last preset automatically stored will then be played. Manual programming 1 Tune to your desired station (see "Tuning to radio stations"). 2 Press PROGRAM to activate programming. 3 Press PRESETí / ë (or í / ë on the remote) to allocate a number from 1 to 40 to this station. 4 Press PROGRAM again to confirm the setting. ➜ The preset number and the frequency of the preset station are shown. 5 Repeat the above four steps to store other stations. ● You can override a preset station by storing another frequency in its place. Tuning to preset radio stations ● Press PRESETí / ë (or í / ë on the remote) until the desired preset station is displayed. Programming radio stations You can store up to a total of 40 radio stations in the memory for each band. Automatic programming Automatic programming will start with a chosen preset number. From this preset number upwards, former programmed radio stations will be overridden. 17