Philips MCM275 User manual - Page 14
Connecting an additional, appliance
UPC - 609585110724
View all Philips MCM275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
English Installation Or Insert the loop antenna into the slot on the set Connecting an additional appliance Connecting a USB device or memory card By connecting a USB mass storage device (including USB flash memory, USB flash players or memory cards) to the Hi-Fi system, you can enjoy the device's stored music through the powerful speakers of Hi-Fi system. 1 Check you have unfolded the control panel 2 Fit the plug of the loop antenna to AM ANTENNA as shown below 3 Adjust the position of the antenna for optimal reception (as far away as possible from the TV, VCR or other radiation sources) AM ANTENNA 2 Insert the USB device's USB plug into the socket on the set 's foldable control panel FM antenna The wire antenna supplied can only be used to receive nearby stations. For better reception we recommend using a cable antenna system or an outdoor antenna. 1 Extend the wire antenna and fit it to FM ANTENNA as shown below Note: If you are using a cable antenna system or an outdoor antenna, fit the antenna plug, instead of the wire antenna, to FM ANTENNA . 2 Move the antenna in different positions for optimal reception (as far away as possible from the TV,VCR or other radiation sources) 3 Fix the antenna's end to the wall 14 or for the devices with USB cable: a. Insert one plug of the USB cable (not supplied) to the socket on the set 's foldable control panel b. Insert the other plug of the USB cable to the USB output terminal of the USB device or for the memory card: a. Insert the memory card into a card reader (not supplied) b. Use a USB cable (not supplied) to connect the card reader to the socket on the set 's foldable control panel