Philips MCM760 User manual - Page 30

English TAPE IMPORTANT! Recording is permissible if copyright or other rights of third parties are not infringed upon. Preparation 1 Press TAPE/AUX once or more to select TAPE(or TAPE on the remote control) 2 Load a recordable tape into the tape deck. 3 Press í or ë on the remote control to select the recording tape side. ➜ A appears on the display for the reverse side ➜ B appears on the display for the forward side 4 Press TAPE A/B repeatedly on the remote control to select a recording mode. ➜ å for recording on one side only. ➜ ∂ for recording on both sides. 5 Prepare the source to be recorded. CD - load the disc TUNER - tune to the desired radio station USB - connect a USB device AUX - connect external equipment Helpful hints: When recording is in progress, it is not possible: - to change tape side; - to listen to another source; - to activate the timer function. - One Touch Recording is not possible in TAPE mode, "SELECT SOURCE" will appear. Tape recording One touch recording 1 Select the recording source: CD, TUNER, USB or AUX 2 Start playback of the selected source 3 Press TAPE RECORD ➜ REC starts flashing 4 To stop recording, pressÇon the set CD/USB Synchro start recording 1 Select the recording source: CD or USB 2 If necessary, press í or ë once or repeatedly until the desired track number appears in the display ● MP3/WMA: Press à / á and í or ë to select the desired album and track Or ● Program your desired tracks (see CD: Programming tracks) - Make sure you press Ç after finishing programming 2 Press TAPE RECORD ➜ The playback and recording start automatically 3 For brief interruption, pressÉÅ. To resume recording, press ÉÅagain 4 To stop recording, pressÇ ➜ Recording and playback will stop simultaneously 30