Philips NP2500 Quick start guide - Page 10

Here is how to create a wireless connection any time 'after' the initial setup: 1 Ensure that your network name and network password or encryption key are available. 2 Turn on the player. 3 Turn on your wireless access point or wireless router with broadband Internet access. 4 Press SETTINGS, to go to the Settings menu. 5 Select [Wireless (WiFi)] to start the network setup process. • For wireless routers with Wi-Fi protection system (WPS) that supports push button configuration (PBC): On the router, press the WPS PBC push button (often displayed as ) to activate. On NP2500 press OK to confirm. • For wireless routers with Wi-Fi protection system (WPS) that supports a personal identification number (PIN): On NP2500 select WPS PIN, then enter the displayed PIN on the router. • For other wireless routers: >> NP2500 searches for networks. 6 Select your network from the list of found networks and confirm. 7 Enter the encryption key (if required) and confirm. (press CLEAR to delete last character entry / press hold CLEAR to delete line entry) >> The player acquires the automatic IP address; shows the confirmation for the connection to the network; shows the prompt for the connection to the Internet. 8 Select [Yes] to connect to the Internet. >> The player shows the confirmation for the connection to the Internet. This icon indicates steps on your remote control! 8