Philips PD9003 User manual - Page 29

DVB-T signal is too weak or out of DVB-T signal covering area.

Page 29 highlights

Cannot play disc • Ensure the disc label is upwards. • Clean the disc. With a clean, soft, lint-free cloth, wipe the disc outwards from the center. • Check if the disc is defective by trying another disc. No response to operating commands • The operation is not permitted by the disc. The player feels warm • When the player is in use for a long period of time, its surface will be heated. This is normal. No/weak signal displayed on the screen • DVB-T signal is too weak or out of DVB-T signal covering area. • Make sure you are in an area with sufficient coverage. • Receiving DVB-T in a driving car may cause signal problems. Loss of current TV programs when travelling to another country 1 Press SETUP. 2 Select [DTTV] > [Country]. 3 Select you country. 4 Select [Auto search]. 30 EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

30
Cannot play disc
Ensure the disc label is upwards.
Clean the disc. With a clean, soft, lint-free cloth, wipe the disc
outwards from the center.
Check if the disc is defective by trying another disc.
No response to operating commands
The operation is not permitted by the disc.
The player feels warm
When the player is in use for a long period of time, its surface will be
heated. This is normal.
No/weak signal displayed on the screen
DVB-T signal is too weak or out of DVB-T signal covering area.
Make sure you are in an area with sufficient coverage.
Receiving DVB-T in a driving car may cause signal problems.
Loss of current TV programs when travelling to another country
1
Press
SETUP
.
2
Select
[DTTV]
>
[Country]
.
3
Select you country.
4
Select
[Auto search]
.
EN