Philips S890 User Manual - Page 31

Delete delete the current MMS. Delete All delete all the MMS in the drafts folder. Use Number extract the number of the sender and recipient, Dial or Save To Phone Book. Message Settings The user must make the necessary settings in order to use the MMS feature. Enter MMS Settings and carry out the following settings: Sending set sending parameters as follows: • Validity period: set the duration that the current MMS will be saved in the MMS centre (this is dependent on the service provided by your network operator). You can select 1 Hour, 12 Hours, 1 Day, 1 Week or Max using . Max duration is determined by the MMS service centre. • Read report: feedback as to whether or not the recipient has read the MMS. 30 Retrieval • Delivery report: feedback as to whether or not the MMS has been successfully sent to the recipient. • Priority: set the priority of the current MMS. This includes Normal, High and Low. • Slide Timing: control the default display time of the page. You can enter a number between 1 and 60. • Delivery time: set the duration for resending - Immediate, In one hour, In 12 hours or In 24 hours. set the retrieval parameter as follows: • Home network: set the degree of emergency in the downloading of MMS. If you select Immediate, the MMS will be downloaded immediately when it arrives; if you select Delayed, you will be notified that you have received a new MMS and you can decide whether or not to download. You can select Restricted to reject the receipt of MMS. Messages