Philips WACS700 Quick start guide - Page 3

A Connect/Setup Set up Wi-Fi connection between Center and Station 1 The first time you set up the Wi-Fi connection, place WAC700 Center and WAS700 Station side by side on a flat and firm surface. 2 Connect WACS700 to power supply, first the Center and then the Station Center/Station: • The screen lights up Auto installation/connection starts • When the installation/connection is completed, both Center & Station will enter HD(Harddisk) mode (see screen illustration at the right) (Make sure you have powered up the Center before powering up Station) 3 Finally, to relocate Center and Station as you desire: • Simply unplug your Center or Station and power them up in different rooms • You will be able to playback music stored in the HD to both the Center and the Station IMPORTANT! • Avoid thick walls. Separating your Center and Station by 2 or more walls may cause poor streaming connection. • Keep your Center and Station away from the source of interference, for example: plasma TVs, microwave ovens, DECT phones, bluetooth devices, cordless phones, other Wi-Fi products. • For best streaming connection, adjust the location of your Center and Station according to the reception status of Wi-Fi signals : indicates maximum reception; : indicates minimum reception • For wall mounting, please refer to the User Manual, Appendix: How to mount your Center and Station onto walls. You may need assistance from the qualified service personnel. Center AC Station AC HD mode (Harddisk)