Philips Xenium 99e User Manual - Page 35

Phone number This is the number your mobile phone dials to establish a connection. First choose ISDN or Analogic (depending on your network operator) and then enter the Phone number provided by your operator. Login & Password The login and password provided by your GSM network operator to access this service. Auto disconnect Enter an inactivity time-out value after which the phone will automatically end the call (if a connection was in progress). The value must be over 30 seconds. GPRS settings If using GSM is like a dial-up internet connection, a GPRS connection would be the equivalent of broadband. GPRS (or Global Packet Radio Service) is a protocol for sending data rapidly using a radio signal. To configure a GPRS connection, you may need to provide a a user name and password, although some GPRS connections function without them. You will need to provide the APN (or Access Point Name). Bearer This menu option allows you to choose which how to establish an internet connection. • GSM: your mobile will only use the GSM network for e-mail connections. • GPRS: your mobile will only use the GPRS network for e-mail connections. • GPRS first: your mobile will first try to connect to the GPRS network. If no GPRS network is available, then it will try with the GSM network. For these features to work, you must first have entered the corresponding settings. Inbox E-mail This menu allows you to connect to your mailbox and download the e-mail headers (sender and subject lines) from the server. You may then choose to retrieve the corresponding e-mails. 1. Select Inbox E-mail: your phone automatically connects to the e-mail server and downloads the list of e-mail headers if any (five at a time). 2. If Next (or Previous) appears at the end (or beginning) of the list, other e-mail headers are pending: select one of the available options and press , to retrieve them. 34 Messages