Pioneer AVH-P4200DVD Owner's Manual - Page 62
System settings, Menu operations - aux input
UPC - 012562975825
View all Pioneer AVH-P4200DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Section 14 Menu operations System settings Switching the auxiliary setting Activate this setting when using an auxiliary device connected to this unit. 1 Display the system menu. Refer to Introduction of menu operations on page 54. 2 Touch AUX Input on the system menu to turn AUX Input on or off. Setting AV input Activate this setting when using an external video component connected to this unit. 1 Display the system menu. Refer to Introduction of menu operations on page 54. 2 Touch AV Input on the system menu to turn AV Input on or off. Setting the rear output and subwoofer controller This unit's rear output (rear speaker leads output and RCA rear output) can be used for fullrange speaker (Full) or subwoofer (Subwoofer) connection. If you switch the rear output setting to Subwoofer, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp. Initially, the unit is set for a rear full-range speaker connection (Full). 1 Turn the unit off. Refer to Basic Operations on page 11. 2 Display the system menu. Refer to Introduction of menu operations on page 54. 3 Touch Rear Speaker on the system menu to switch the subwoofer output or full-range speaker. # When no subwoofer is connected to the rear output, select Full (full-range speaker). # When a subwoofer is connected to the rear output, select Subwoofer (subwoofer). # When the rear output setting is Subwoofer, you cannot operate the following procedure. Notes ! Even if you change this setting, there is no output unless you turn the subwoofer output on (refer to Using subwoofer output on page 56). ! If you change this setting, subwoofer output in the audio menu will return to the factory settings. ! Both rear speaker lead outputs and RCA rear output are switched simultaneously in this setting. Switching sound muting/ attenuation Sound from this system is automatically muted or attenuated when a signal from equipment with a mute function is received. ! Sound from this system returns to normal when the muting or attenuation is canceled. 1 Display the system menu. Refer to Introduction of menu operations on page 54. 2 Touch Mute/ATT until the desired setting appears. Touch Mute/ATT until the desired setting appears in the display. ! Mute - Muting ! ATT -20dB - Attenuation (ATT -20dB has a stronger effect than ATT -10dB) ! ATT -10dB - Attenuation ! Off - Turns the sound muting/attenuation off 62 En