Pioneer AVIC-F900BT Owner's Manual - Page 181
Liquid crystal display LCD screen, Maintaining the LCD screen, LED light-emitting diode, backlight
UPC - 012562890265
View all Pioneer AVIC-F900BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
Appendix Appendix Appendix ! The LCD screen should be used within the temperature ranges shown in "Specifications". ! Do not use the LCD screen at temperatures higher or lower than the operating temperature range because the LCD screen may not operate normally and the LCD screen can be damaged. ! The LCD screen is exposed in order to increase its visibility within the vehicle. Please do not press strongly on it as this may damage it. ! Do not push the LCD screen with excessive force as this may scratch it. ! Never touch the LCD screen with anything besides your finger when operating the Touch Panel functions. The LCD screen can scratch easily. (The stylus is supplied for special calibrations. Do not use the stylus for normal operation.) Liquid crystal display (LCD) screen ! If the LCD screen is near the vent of an air conditioner, make sure that air from the air conditioner is not blowing on it. Heat from the heater may break the LCD screen, and cool air from the cooler may cause moisture to form inside the navigation unit, resulting in possible damage. ! Small black dots or white dots (bright dots) may appear on the LCD screen. These are due to the characteristics of the LCD screen and do not indicate a problem with the LCD screen. ! The LCD screen will be difficult to see if it is exposed to direct sunlight. ! When using a cellular phone, keep the antenna of the cellular phone away from the LCD screen to prevent disruption of the video in the form of disturbances such as spots or colored stripes. ! When wiping the LCD screen, take care not to scratch the surface. Do not use harsh or abrasive chemical cleaners. LED (light-emitting diode) backlight A light emitting diode is used inside the display to illuminate the LCD screen. ! At low temperatures, using the LED back- light may increase image lag and degrade the image quality because of the characteristics of the LCD screen. Image quality will improve with an increase in temperature. ! The product lifetime of the LED backlight is more than 10 000 hours. However, it may decrease if used in high temperatures. ! If the LED backlight reaches the end of its product lifetime, the screen will become dark and the image will no longer be projected. In this case, please consult your dealer or the nearest authorized PIONEER Service Station. Maintaining the LCD screen ! When removing dust from the LCD screen or cleaning it, first turn the system power off, then wipe with a soft dry cloth. En 181