Pioneer AVIC-F900BT Installation Manual - Page 16
When connecting a rear view, camera, Connecting the System - wiring
UPC - 012562890265
View all Pioneer AVIC-F900BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Section 03 Connecting the System When connecting a rear view camera When this product is used with a rear view camera, it is possible to automatically switch from the video to rear view image when the gear shift is moved to REVERSE (R). RearView mode also allows you to check what is behind you while driving. WARNING USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE. Rear view camera (e.g. ND-BC2) (sold separately) To video output RCA cable Violet/white Brown (REAR VIEW CAMERA IN) 20 cm RCA connector (7-7/8 in.) Power cord CAUTION ! The screen image may appear reversed. ! The rear view camera function is to use this product as an aid to keep an eye on trailers, or backing into a tight parking spot. Do not use this function for entertainment purposes. ! The object in rear view may appear closer or more distant than in reality. ! Please note that the edges of the rear view camera images may differ slightly according to whether full screen images are displayed when backing, and whether the images are used for checking the rear when the vehicle is moving forward. CAUTION Be sure to use only the supplied extension lead. Use of another lead could cause fire, smoke and/or damage this navigation system. 5 m (16 ft. 5 in.) The navigation unit Extension lead (for reverse signal) Fuse resistor For more details about the wiring, refer to Connecting the power cord (2) on page 12 Notes ! It is necessary to set [Back Camera] in [System Settings] to [On] when connecting the rear view camera. (For details, refer to "Operation Manual".) ! Connect to the rear view camera. Do not connect to any other equipment. 16 En